Pulley Set
#1
Pulley Set
Do they make a standard pulley set for the SN cars? I've spent all this week and all I find are underdrives, which from what I've read these cars don't like very much. I'd rather not use the stock pulleys since the 302 in the car is a bit noisy and squeaky. Pretty sure the bearings in the pulleys are shot
#2
you should be able to order a lot of the stock pullies either through Napa or your local dealer or look in the classifieds on forums and post an ad, Gauranteed there are plenty out there with stock pullies laying around
#4
somewhat, but my rides pulley systems are more so configured with stuff to accomadate my set ups, for example, I run a cobra overdrive on my s/c vert and a windstar pulley on the power steering, had to do this so belt wouldn't rub as I run a p/s relocate, on my 85 I run a underdrive on the crank and that's it as I run a meziere elec water pump with idler built in and alt is a powermaster pulley
#5
Just so you know the pulleys do not have bearings in them. They are steel or aluminum. Bearings are in the components. Under drive pullies dont hurt anything except the alternator. Just run the stock pulley on it and youll be fine.
#7
If there's an underdrive on the crank and a stock pulley on the alternator will that affect belt length?