Cold Start problems!!!
#1
Cold Start problems!!!
Good morning,
I am have a lil cold start problem with my 87 drop top. When i start my car it wont stay cranked. I have to give it a lil gas for about 15-30 sec in order for it to stay crank and idle. It only happen like this on a cold start from not starting it for 3 or more days.
87 drop top
longtube headers
msd
E303 cam
SR intake
70 mm throttlebody
Gt 40 heads
3 row alminum radiator
I am have a lil cold start problem with my 87 drop top. When i start my car it wont stay cranked. I have to give it a lil gas for about 15-30 sec in order for it to stay crank and idle. It only happen like this on a cold start from not starting it for 3 or more days.
87 drop top
longtube headers
msd
E303 cam
SR intake
70 mm throttlebody
Gt 40 heads
3 row alminum radiator
#3
How long have you had this symptom since you installed those mods? Was the cold start issue immediate after the mods? Also, what base ignition timing are you using?
I'd check your ECT sensor as well, as 88_oragepeelnotch mentioned.
Shane
I'd check your ECT sensor as well, as 88_oragepeelnotch mentioned.
Shane
#5
Good morning,
I am have a lil cold start problem with my 87 drop top. When i start my car it wont stay cranked. I have to give it a lil gas for about 15-30 sec in order for it to stay crank and idle. It only happen like this on a cold start from not starting it for 3 or more days.
87 drop top
longtube headers
msd
E303 cam
SR intake
70 mm throttlebody
Gt 40 heads
3 row alminum radiator
I am have a lil cold start problem with my 87 drop top. When i start my car it wont stay cranked. I have to give it a lil gas for about 15-30 sec in order for it to stay crank and idle. It only happen like this on a cold start from not starting it for 3 or more days.
87 drop top
longtube headers
msd
E303 cam
SR intake
70 mm throttlebody
Gt 40 heads
3 row alminum radiator
My check engine light isnt even coming on. Having to give it gas on the start up is point less if i have fuel injection. Might as well be carburated
#8
If this is a symptom that popped up shortly after your mods it is likely because it needs idled up just a touch more . A bit of advance on the dizzy or a base idle reset would probly take care of it. My fox idled about 800-850 rpm when hot, I tried to get it down to the 750 range and it did the same thing on cold start. E303 cam needs a little extra rpm when cold.
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
HIS S-197
4.0L V6 Technical Discussions
1
08-10-2015 05:47 PM