brembo mustang brake line upgrade?
#1
brembo mustang brake line upgrade?
I have a 2011 mustang gt with the brembo brakes, stock front pads, hawks in the rear, stock fluid and lines. I have done multiple autocrosses, multiple days driving aggressively in the mountains, and so far the brakes have been perfect, however I'm going to my first track day at a roadcourse in a few weeks and I'm considering upgrading the brake lines to either stainless or boss lines. My question is: how good are the stock brembo lines? And are the boss lines even worth upgrading to?
thanks
Rob
thanks
Rob
#2
If the stock lines on the GT500 are anything to go by then they are rubber and need to be upgraded if you really plan on putting some heat into them. I went with goodridge stainless lines and I've been running them for nearly 5+ years with no problem.
#3
Stainless cables are great but not necessary. What is necessary is that you have your brake fluid switched with DOT 4 or your fluid will boil over and leave you without brakes on a race track. I have done many track days with the stock lines without any issues. The brembo pads are tough but once they wear down I recommend getting something better when you replace it.
Thread
Thread Starter
Forum
Replies
Last Post
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM