system question
 

so here what i got in my 03
pioneer avic f700bt head unit
alpine spr 13s 5-1/4" Component 2-Way Speaker
apline apr 13c 5-1/4" Coaxial 2-Way Speaker
those powered by a mrp f600 amp
2 swr 1022d 10" subs
those powered by a mrp m1000

put this in maybe in may and sound really good and i like it just seems like theres potential there for it to be so much louder. i tried just playing with it to tune it but just looking for any help if anybody is running a similar setup and could help me out. i like the level i have my subs at right now its my other speakers that i think should be louder tho u can never have to much base. so any suggestion or anything would be awesome. oh and i have the setting for my subs at 4/8(half) and my other speakers both at 5/8

thanks in advance for any help

Whats up bsteves --- can u tell us how you have it wired up? What kinda box are your runnin on the subs? and how did u do the 5 n a quarters? Also did u put in any sound dampener and where? Kenny

ok so i'll start with the subs wiring
got them wired for 2 ohm to my amp then rca to the deck

5-1/4 wired to right to my amp them 2 set of rca to my deck (front and rear)
2 of them have a crossover with seperate tweeter
other 2 have tweeter built into speaker

i also have a battcap 400(i think it is)

box is a bassworx just small basic box has the recommend volume looked into all that b4 hand

as for the 5 1/4 the 2 with the tweeter separate camp with a 6x8 bracket that holds both the tweeter and speaker. the other 2 i bought 6x8 brackets that a 5/14 could mount into.

no sound dampening anywhere

need to know anything else just let me know
thanks