When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well I'll be going down 1.5" which I think might be too low to dial in camber with just mounts. I'm probably making a bigger deal out of which to choose for a mostly street driven car, but I hate to buy something then have to replace it later.
Location: Thomasville, NC Where we beat headers into submission!!
Posts: 7,233
Originally Posted by AJ06GT
Well I'll be going down 1.5" which I think might be too low to dial in camber with just mounts. I'm probably making a bigger deal out of which to choose for a mostly street driven car, but I hate to buy something then have to replace it later.
On the 09, I had FRPP K springs which are 1.5" all around and I ran Camber bolts for 2 years with no issues. I went with BMR since they are grade 8.
CC plates are definitely a better option but I don't know your budget.
03-12-2014, 04:58 PM
