Need Lowering Advice!
#1
Need Lowering Advice!
Alright so im wanting to lower the car, only problem is im not trying to spend an arm and a leg to do it, meaning im not trying to spend a grand to lower it, not meaning to sound cheap but im kinda limited at the moment on what i can spend, so whats some different options i could choose from?? Thanks!
#2
If you just need the basics, most guys go with Eibach Sportlines from what I've seen. From my hands on experience, the Sportlines lower the car the most (compared to the Eibach Pro kit), but still offers good comfort. If you don't believe me, ask my wife! She has the Sportline kit on her car, and she's not one to really modify cars, but she absolutely loves it.
Eibach Sportline Lowering Springs Mustang V6/GT
Match that Eibach kit up there with a good panhard bar like the one I have on my Mustang from Hotchkis, and you're all set. Reason why you need this panhard bar is because when you lower live rear axle vehicles, the axle shifts over depending on how much you lower it. For you, you'll need to adjust about 1/4" of an inch over back to center after it's lowered, so you really do require it. Luckily though, they're not too expensive:
Hotchkis Adjustable Panhard Rod Mustang
Hope that helps!
Eibach Sportline Lowering Springs Mustang V6/GT
Match that Eibach kit up there with a good panhard bar like the one I have on my Mustang from Hotchkis, and you're all set. Reason why you need this panhard bar is because when you lower live rear axle vehicles, the axle shifts over depending on how much you lower it. For you, you'll need to adjust about 1/4" of an inch over back to center after it's lowered, so you really do require it. Luckily though, they're not too expensive:
Hotchkis Adjustable Panhard Rod Mustang
Hope that helps!
#3
If you just need the basics, most guys go with Eibach Sportlines from what I've seen. From my hands on experience, the Sportlines lower the car the most (compared to the Eibach Pro kit), but still offers good comfort. If you don't believe me, ask my wife! She has the Sportline kit on her car, and she's not one to really modify cars, but she absolutely loves it.
Eibach Sportline Lowering Springs Mustang V6/GT
Match that Eibach kit up there with a good panhard bar like the one I have on my Mustang from Hotchkis, and you're all set. Reason why you need this panhard bar is because when you lower live rear axle vehicles, the axle shifts over depending on how much you lower it. For you, you'll need to adjust about 1/4" of an inch over back to center after it's lowered, so you really do require it. Luckily though, they're not too expensive:
Hotchkis Adjustable Panhard Rod Mustang
Hope that helps!
Eibach Sportline Lowering Springs Mustang V6/GT
Match that Eibach kit up there with a good panhard bar like the one I have on my Mustang from Hotchkis, and you're all set. Reason why you need this panhard bar is because when you lower live rear axle vehicles, the axle shifts over depending on how much you lower it. For you, you'll need to adjust about 1/4" of an inch over back to center after it's lowered, so you really do require it. Luckily though, they're not too expensive:
Hotchkis Adjustable Panhard Rod Mustang
Hope that helps!
#4
Of course, it's always nice to have, just in case, and hell, they're cheap:
Eibach Pro-Alignment Camber Bolt Kit: Mustang
I suggest those since you want to limit how much you spend. If this build of yours had an unlimited amount of budget, then of course I'd be recommending camber plates, just because they're a more solid mod than just the bolts.
#6
I have a set of Hotchkis springs and freedom Racing adjustable Panhard and Eibach camber bolts for sale. I have had them for a while and would make you a good deal.
Shohorse(Steve) has the same setup on his car.
Shohorse(Steve) has the same setup on his car.
#7
Lowering with just the springs will cause excessive camber and uneven tire wear up front, that is why we use our strut mounts, in addition to being stronger they have room for camber adjustment, the stock ones don’t.
Camber bolts are a more cost effective way of trying to get around using strut mounts, they have less room for adjustment (about ½ degree vs 1-1.5 degrees with mounts) and are an eccentric bolt. Under shock loads they can shift and cause changes in alignment settings.
You can check out our suspension parts here:
http://www.steeda.com/store/ford-mus...sion-paks.html
Best Regards,
TJ
Camber bolts are a more cost effective way of trying to get around using strut mounts, they have less room for adjustment (about ½ degree vs 1-1.5 degrees with mounts) and are an eccentric bolt. Under shock loads they can shift and cause changes in alignment settings.
You can check out our suspension parts here:
http://www.steeda.com/store/ford-mus...sion-paks.html
Best Regards,
TJ
#10
I vote BMR springs. Used them on my 05gt and gives a nice ride with perfect stance. Throw in an adj. Panhard bar, then go to any auto parts store (that's worth a hoot) and get a set of camber bolts (you will need them to get the alignment right). Done, and you won't break the bank.