"SOLD" 67 Mustang coupe sale KS
08-04-2007, 06:06 PM
#1
Thread Starter
Join Date: Jul 2007
Location:
Posts: 5
"SOLD" 67 Mustang coupe sale KS
For sale-1967project mustang.I don't havethe time that I really wanted to put into it.Asking $4000.00OR BEST OFFER. I will entertain any reasonable offer.MUST SELL.
[ul][*]Carcame with factory V-8, A/C and power steering[*]Has non highway title (means don't have to carry ins. until complete)[*]All sheet metal is present -including xtra pass. door for parts[*]Have all the glass minus front windshield -including xtra drivers vent glass[*]Bodystripped of paint[*]L/H driver door skin, R/H headlight bucket, and R/H fender needs sheet metalwork or replaced.[*]POR 15 in the trunk area, front frame and engine compartment[*]Edelbrock carb. -600 elec. chock NIB[*]Edelbrock performer plus intake (289-302) NIB[*]Edelbrock performer plus cam and lifter kit (289-302) NIB[*]Seat covers (front and rear) NIB[*]Weather stripping kit NIB[*]Front suspension NEW[*]Front disc brake conversion kit (from Texas Mustang -completed by Kansas Klassics) NEW[*]Hump hugger center console (big one) NEW[*]Front valance NEW[*]Stone deflector NEW[*]Splash shields w/ rubber NEW[*]Various body attach hardware NEW[*]Front bumper & attach hardware NEW[*]Battery tray NEW[*]Master cylinder NEW[*]Hedman headers -sm. block NEW[*]Complete exhaust pipes for dual to inc. H-pipe and attach hardware NEW[*]Set of Flowmaster Delta flow mufflers NEW[*]3 engines -'66 30over 289, 87 5.0L, and90s H.O. 5.8L. All with internals and heads[*]3 trannys (auto)[*]16 gal (mustang) & 22 gal fuel tank (couger)[*]Front and rear seats[*]2 automatic shifters[*]Drive shaft[*]2 sets of hubcaps - set of center caps w/ running horse emb., set of spoke (14 in.)[*]2 sets of factory intake w/ 4bbl carbs[*]Boxes of other various parts[/ul]
[ul][*]Carcame with factory V-8, A/C and power steering[*]Has non highway title (means don't have to carry ins. until complete)[*]All sheet metal is present -including xtra pass. door for parts[*]Have all the glass minus front windshield -including xtra drivers vent glass[*]Bodystripped of paint[*]L/H driver door skin, R/H headlight bucket, and R/H fender needs sheet metalwork or replaced.[*]POR 15 in the trunk area, front frame and engine compartment[*]Edelbrock carb. -600 elec. chock NIB[*]Edelbrock performer plus intake (289-302) NIB[*]Edelbrock performer plus cam and lifter kit (289-302) NIB[*]Seat covers (front and rear) NIB[*]Weather stripping kit NIB[*]Front suspension NEW[*]Front disc brake conversion kit (from Texas Mustang -completed by Kansas Klassics) NEW[*]Hump hugger center console (big one) NEW[*]Front valance NEW[*]Stone deflector NEW[*]Splash shields w/ rubber NEW[*]Various body attach hardware NEW[*]Front bumper & attach hardware NEW[*]Battery tray NEW[*]Master cylinder NEW[*]Hedman headers -sm. block NEW[*]Complete exhaust pipes for dual to inc. H-pipe and attach hardware NEW[*]Set of Flowmaster Delta flow mufflers NEW[*]3 engines -'66 30over 289, 87 5.0L, and90s H.O. 5.8L. All with internals and heads[*]3 trannys (auto)[*]16 gal (mustang) & 22 gal fuel tank (couger)[*]Front and rear seats[*]2 automatic shifters[*]Drive shaft[*]2 sets of hubcaps - set of center caps w/ running horse emb., set of spoke (14 in.)[*]2 sets of factory intake w/ 4bbl carbs[*]Boxes of other various parts[/ul]
08-09-2007, 10:38 PM
#3
Thread Starter
Join Date: Jul 2007
Location:
Posts: 5
RE: 1967 Mustang coupe for sale in KS
Until I make the pics that I have a smaller size (kb), here is a link to some of the pictures that I have posted. If you want to see more pic, I will email them. Thanks.
http://wichita.craigslist.org/car/391135144.html
http://wichita.craigslist.org/car/391135144.html
Thread
Thread Starter
Forum
Replies
Last Post
NTO_GUY
Vendor For Sale / Group Buy Classifieds
4
12-24-2015 11:23 AM