67 coupe lots parts $1750, c4 added project
02-14-2008, 07:42 AM
#1
1st Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 96
67 coupe lots parts $1750, c4 added project
Moved from classified mustang parts 02/14/08
added C4 trans complete for the 351 cleveland price is now $1750. As I begin work the price will increase as the work progresses. Spring is comming and work will begin.
http://s217.photobucket.com/albums/cc25/dgulian/
the tan parts
OK i git a 400m with a c6.Has all the accessories. I have the orginal I6 with a C4 butno accessories, I get a 78 6cyl that has all the accessories,Then I get what looks like a good 2v 351 cleveland from a stick shift top loader (never bored and the bores look good). I got the pressure plate clutch disk and flywheel. I then pick up a 67 bell hsg off E- bay for a c4 to a cleveland. casting munber says it is a 67 mustang bell . To cold to pull down the stick parts off the 351c as yet.The flexplate is a 157 tooth 28 oz plate with a diagonal cross point bolt of 10.5 inchs for the converter. The bell hsg takes a 2 bolt starter and I have one on the 400 I hope will fit the bell hgs and flexplate. I have yet to count the splines on either c4"s. I koow one is on the 6 cyl from a 1978 fairmount.[:-] Does any one have a lead on a torque conver for cheap just to check this thing out? [
]These ford parts are driving me nuts. I just got out of the hospial today and side stepped another heart attack. So work may not be completed on the 67 coupe.good solid body and cowltwo patch panels have been bought for the front floor (Just a little rust)and a lower patch for the LH 1/4 panel lower, and a new trunk lid rather than mess with the rear under lip lots of spare parts. I have an 86 ranger rear end I THINK HAS POSI. plus 2 stock 67 rears as well. and on an on. Lolated in Augres michigan, 48703. send request for pictures. dgulian@yahoo.com Pick up only. car trailer and a full size pickup for the parts and another if you want all the engines. $2250 OBOtakes all. All the interior is there and in good conditionand many duplicate parts that can be sold off for funds for the project. I tried to list this in the classified and got to many crooks. Deposit of $400 will hold and lenbth of tme will depend on how losey the weather is to move it. I can get help to load But I can no longer do any heavy moving myself. This is a shut down of my hotroding shop so the first come first served is in affect. Of course the sin of chevy parts are there as well in abundance
.hanks
Den
E-mail me at dgulian@yahoo.comIf we seem to hit it off phons contact will dbe ok
also have the 5 lug spindels and complete brake assembly for the front. The 86 ranger rear end is a five lug.
< Message edited by dgulian -- 2/14/2008 5:38:23 AM >
added C4 trans complete for the 351 cleveland price is now $1750. As I begin work the price will increase as the work progresses. Spring is comming and work will begin.
http://s217.photobucket.com/albums/cc25/dgulian/
the tan parts
OK i git a 400m with a c6.Has all the accessories. I have the orginal I6 with a C4 butno accessories, I get a 78 6cyl that has all the accessories,Then I get what looks like a good 2v 351 cleveland from a stick shift top loader (never bored and the bores look good). I got the pressure plate clutch disk and flywheel. I then pick up a 67 bell hsg off E- bay for a c4 to a cleveland. casting munber says it is a 67 mustang bell . To cold to pull down the stick parts off the 351c as yet.The flexplate is a 157 tooth 28 oz plate with a diagonal cross point bolt of 10.5 inchs for the converter. The bell hsg takes a 2 bolt starter and I have one on the 400 I hope will fit the bell hgs and flexplate. I have yet to count the splines on either c4"s. I koow one is on the 6 cyl from a 1978 fairmount.[:-] Does any one have a lead on a torque conver for cheap just to check this thing out? [
]These ford parts are driving me nuts. I just got out of the hospial today and side stepped another heart attack. So work may not be completed on the 67 coupe.good solid body and cowltwo patch panels have been bought for the front floor (Just a little rust)and a lower patch for the LH 1/4 panel lower, and a new trunk lid rather than mess with the rear under lip lots of spare parts. I have an 86 ranger rear end I THINK HAS POSI. plus 2 stock 67 rears as well. and on an on. Lolated in Augres michigan, 48703. send request for pictures. dgulian@yahoo.com Pick up only. car trailer and a full size pickup for the parts and another if you want all the engines. $2250 OBOtakes all. All the interior is there and in good conditionand many duplicate parts that can be sold off for funds for the project. I tried to list this in the classified and got to many crooks. Deposit of $400 will hold and lenbth of tme will depend on how losey the weather is to move it. I can get help to load But I can no longer do any heavy moving myself. This is a shut down of my hotroding shop so the first come first served is in affect. Of course the sin of chevy parts are there as well in abundance .hanks
Den
E-mail me at dgulian@yahoo.comIf we seem to hit it off phons contact will dbe ok
also have the 5 lug spindels and complete brake assembly for the front. The 86 ranger rear end is a five lug.
< Message edited by dgulian -- 2/14/2008 5:38:23 AM >
03-17-2008, 01:25 AM
#4
4th Gear Member
Join Date: Dec 2006
Location:
Posts: 1,097
RE: 67 coupe lots parts cut to $1500 project
so how much for the car and the parts, no engines or trannies? I'm only interested in the car as a roller and whatever body or interior parts you have along with it. No Interest or any motors or trannies.
03-17-2008, 06:30 PM
#5
1st Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 96
RE: 67 coupe lots parts cut to $1500 project
Only interested in selling the entire package. Do not want the hassel of parting it out. does not have disc brakes. I have the comlete car with the interior as shown at photobucket link
03-22-2008, 06:01 PM
#8
1st Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 96
RE: 67 coupe lots parts cut to $1500 project
I will not post the VIN number in a public forum send me a private e-mail and I will supply it. I am picking up a complete C4 trans for it next weekend. It will bolt up to the 351 cleveland. I am adding on the cost of it which is $250 so the price is now $1750. As spring gets here I am getting more interest so whatever happens, happens.As far as a trade send me pictures of this 88 GT. E-Mail is dgulian@yahoo.com
04-01-2008, 10:10 AM
#10
1st Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 96
RE: 67 coupe lots parts cut to $1500 project
Computer in for warrenty work. sorry for the delay.
CODE here is the first part of the title 7RD1TXXXXXX Vin is on fender flang and door I will have to move it in storage to get at it. IF you really need to know conact me and I will go and pull it out and check.
CODE here is the first part of the title 7RD1TXXXXXX Vin is on fender flang and door I will have to move it in storage to get at it. IF you really need to know conact me and I will go and pull it out and check.