help looking for a front oil sump pickup
12-24-2011, 08:10 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2011
Location: Reno,NV
Posts: 319
help looking for a front oil sump pickup
hello all, as everyone know i have a 302 engine from a 1987 bronco(which has the rear sump) and now i am in need of a front sump oil pickup(summit racing cant find a PN# for me). can anyone point me to the right direction where i can find this oil pickup? oh and it is a stock oil pan.
Thank you,
12-24-2011, 08:11 PM
ROTM Moderator
Join Date: May 2007
Location: Huntsville, AL
Posts: 8,146
I bought mine from mustangs unlimited.
12-24-2011, 08:24 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2011
Location: Reno,NV
Posts: 319
Quote:
Originally Posted by
1slow67
I bought mine from mustangs unlimited.
would you happen to have the PN#?
12-24-2011, 08:38 PM
ROTM Moderator
Join Date: May 2007
Location: Huntsville, AL
Posts: 8,146
22411118 02 at mustangs unlimited, should be around $17.
12-24-2011, 09:14 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2011
Location: Reno,NV
Posts: 319
Quote:
Originally Posted by
1slow67
22411118 02 at mustangs unlimited, should be around $17.
PN# dont show up on their website....
Last edited by lucasp; 12-25-2011 at 04:32 PM .
12-26-2011, 10:17 AM
6th Gear Member
Join Date: Oct 2006
Location:
Posts: 8,162
12-27-2011, 06:23 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2011
Location: Reno,NV
Posts: 319
Quote:
Originally Posted by
andrewmp6
even though it doesnt show my year engine(since it was on a rear sump) just wondering if this will still fit. and i already have a stock oil pan.
12-27-2011, 09:22 PM
ROTM Moderator
Join Date: May 2007
Location: Huntsville, AL
Posts: 8,146
It should fit, I don't think there is a difference in any 289 or 302 oil pump.
12-27-2011, 09:59 PM
6th Gear Member
Join Date: Oct 2006
Location:
Posts: 8,162
It will fit i seen a few take the factory oil pan and bolted it right on a newer 302.
12-27-2011, 10:25 PM
ROTM Moderator
Join Date: May 2007
Location: Huntsville, AL
Posts: 8,146
Quote:
Originally Posted by
andrewmp6
It will fit i seen a few take the factory oil pan and bolted it right on a newer 302.
That's what I did, no problems at all.