'66 with an Edelbrock .351 looking for advice
 

I just purchased a '66 with an Edelbrock .351. I am looking for anyone with a similar car/engine to swap information. The guy I picked this up from had to leave the country and I am at a loss for a lot of the little details. however, it is my dream car and I want to keep her tip-top.

Please PM me or respond to this thread if you are willing to mentor me or simply discuss this powerhouse and talk about yours.


[IMG]local://upfiles/54936/1460175112B24303B6C4E62E277C43B7.jpg[/IMG]

[IMG]local://upfiles/54936/19BA04AE387945409E34D6CD92789C08.jpg[/IMG]

[IMG]local://upfiles/54936/4C7563067E5240929B70962513FC47DF.jpg[/IMG]

[IMG]local://upfiles/54936/B73F1B7A32F3475DAFE3C29BBB4F7AC9.jpg[/IMG]

RE: '66 with an Edelbrock .351 looking for advice
 

I have a somewhat similar setup on my 65. I built a 351w and put it in a couple years ago, it is covered in edelbrock though. Here is a link to some pics cause I still dont know how to post them on the forums. http://www.cardomain.com/ride/2508353

If you have any questions just post em and Ill see what I can answer.

I dont know if you are planning on modding the car further or not but I am currently working on backhalfing mine. New framerails, sheet metal, four link and coilovers will take residence in and underneath the trunk.