putting in new suspsension help
#1
putting in new suspsension help
so i finally got my kit after 3 weeks of waiting because of a bank error i got a kit with 1 1/2 inch raise for the back but i took a look at my suspension now and cant figure out how to hook it up, pick will help this is what i got http://cgi.ebay.com/ebaymotors/67-68...QQcmdZViewItem
#2
RE: putting in new suspsension help
Wow that looks like a good deal. I just put some aftermarket shackles on mine this weekend to help raise up the rear end. It actually wasn't too difficult.
The hardest part was taking out the old rubber bushings because there was some rust inside it.
The hardest part was taking out the old rubber bushings because there was some rust inside it.
#3
RE: putting in new suspsension help
Not sure what part you are stuck on. Have you removed the rear springs that were on the car?
What year is you car? Have you already removed the old springs? These links may help.
http://www.mustangmonthly.com/projec...ade/index.html
http://www.fronteraowners.co.uk/info/leaf_springs.htm
Jav
What year is you car? Have you already removed the old springs? These links may help.
http://www.mustangmonthly.com/projec...ade/index.html
http://www.fronteraowners.co.uk/info/leaf_springs.htm
Jav
Thread
Thread Starter
Forum
Replies
Last Post
1996cobraconvertible
SVT Forums
13
01-07-2016 04:50 AM
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM