Whitetruedat

Can someone let help me out and let me know what is required for a 68 fog light installation?I have the fog light bulbs and metal cases, I was just wondering what else I needed?

Thanks

musnicki

I just did this myself a few weekends ago on my 67'. Here is a link to the kit that I bought at CJ Pony Parts ----> http://www.parts123.com/parts123/yb.dll?parta~partsort

Sounds like you'll need the switch that mounts inside the car and a few wires running from the lights to power source and to the switch or you could just tie them into the parking lights like a few people do. You'll need the metal frame that will support the lights which mount on the back side of your grille and the wing thing coming from the Pony symbol on the front center of the car. Oh and the lights install with the lines on the front of the glass going verticle. It took me a few tries to get it right. My sig has before and after pics.

James

d_ford

Wish I could help you out but I'll be trying to figure out the same thing one of these days. I have the fog lights in the grill and I have the switch, but the wiring harness in the car apparently isn't for a fog light equipped car. I can't find a place on the harness to plug in the switch. Guess I'll be trying to figure out how to wire it in too when I get to that point. I'll try to keep an eye on this thread.

Whitetruedat

Thank you very much, i'm gonna keep looking around and see what I can find.

I'll post links if I run into anything helpful.