1969-1970 clutch pedal & Linkage
#1
1969-1970 clutch pedal & Linkage
Hey guys, I am getting a clutch pedal and linkage off a 69 donor car to put on my 70 coupe which is an automatic. Will this pedal set up work? I know that I will have to trim my 70 pedal to get it to match, but I am wondering if the 70 has its own pedal. I have an interchange book, but I have seen guys use older pedals on new cars, 65 on a 68 for example. Will I have a problem with this?
#3
The 70 brake pedal is unique in that the rod that connects to the master cylinder has a round hole at its end where as the 69 is square. This could be true only for power brakes, which the car does not currently have, but I have the booster which will be applied at a later date.
#4
The 70 brake pedal is unique in that the rod that connects to the master cylinder has a round hole at its end where as the 69 is square. This could be true only for power brakes, which the car does not currently have, but I have the booster which will be applied at a later date.
1967-1969: 1970:
Last edited by 2+2GT; 08-06-2011 at 07:22 PM.
#6
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM