Help with swap

Reply Subscribe

Thread Tools

Search this Thread

08-23-2018, 09:35 AM

Old dogs new tricks

Thread Starter

Join Date: Aug 2018

Location: Ok

Posts: 2

Help with swap

I have a 67 mustang, I had a 5 speed put in from a 97 5.0, my car was originally automatic, now my clutch pedal is way to low and I am told no adjustments??? It is a cable style clutch. Suggestions?.

08-23-2018, 10:15 AM

MonsterBilly

4th Gear Member

Join Date: Aug 2008

Location: Goodyear, AZ

Posts: 1,674

sounds to me like they installed a hydraulic clutch. It can be adjusted if it was done correctly. There should be a shaft going from the slave cylinder to the lever. Unless they installed a hydraulic slave throwout bearing. In that case, it cannot be adjusted unless the mounting point from the lever to the pedal is changed

08-23-2018, 01:48 PM

Old dogs new tricks

Thread Starter

Join Date: Aug 2018

Location: Ok

Posts: 2

I'm not real versed on the different clutch set ups. This does not have a hydraulic (oil filled) canister .the cable comes from beside the bell to the fire-wall and mounts to the pedal