Duba

I have looked at past threads and cannot tell the answer to this question regarding my C4 transmission module.

Is the vacuum line originally rubber all the way to the carburetor or is there rubber and then some sort of tubing then transitions back to rubber into the carb?

Does anyone have pictures available?

1970

i belive it had a hard line that was conected to both ends with tubing i got mine from cj
http://www.cjponyparts.com/transmiss...69/p/MUM1005O/

scott_m_mil

My car had a hard line from the intake manifold all the way to almost the back of the transmission where a rubber line was used. This was a '66 with a 200. Unless you are after concourse correct, rubber all the way will work fine.

Duba

Ok, got the hard line because of convience. Could someone send me a pix on what route to route this thing? I need to attach it to something so it does not rattle? Which end is which? Pictures or something?

I have a the mustang but never knew it was supposed to have it. My friend who did the motor and tranny work did not know. Bummer. Should not have friends like that. Have not been driving much as there is much to do.

Duba

Bump, looking for the clip that attaches to the bell housing and still looking for some sort of picture of which end goes on the modulator end.

Any ideas??