Getting beat up by air cleaners...help
#41
this whole air cleaner selection stuff is a lot of work
Ive been keeping tabs on my current setup and after oiling it dust levels seem okay at this point...but it still has a deteriorated element on the lid with really large holes that no oil would fill....A real K&N filter would probably be adequate as it would have a nice uniform mesh with no holes.
-Gun
Ive been keeping tabs on my current setup and after oiling it dust levels seem okay at this point...but it still has a deteriorated element on the lid with really large holes that no oil would fill....A real K&N filter would probably be adequate as it would have a nice uniform mesh with no holes.
-Gun
#42
This is what I am running on mine now. Sometimes I will run a 15" Oval Billet Aluminum air cleaner without any issues.
http://carphotos.cardomain.com/ride_...0029_large.jpg
http://www.carid.com/kn/kn-accessories-313134.html
http://static.summitracing.com/globa...G285_SN_xl.jpg
http://carphotos.cardomain.com/ride_...0029_large.jpg
http://www.carid.com/kn/kn-accessories-313134.html
http://static.summitracing.com/globa...G285_SN_xl.jpg
#43
Well I went with an edelbrock
http://www.summitracing.com/parts/edl-42364
Its not perfect but it met the size requirements the closest. I was concerned about excessive dust getting past the filter but after close monitoring I have reached the conclusion that this is not an issue. I see no evidence of dust accumulation at all. The cotton mesh is nice and close there are no holes like with the summit brand. It seems to flow very well too.
Thanks
-Gun
http://www.summitracing.com/parts/edl-42364
Its not perfect but it met the size requirements the closest. I was concerned about excessive dust getting past the filter but after close monitoring I have reached the conclusion that this is not an issue. I see no evidence of dust accumulation at all. The cotton mesh is nice and close there are no holes like with the summit brand. It seems to flow very well too.
Thanks
-Gun
Thread
Thread Starter
Forum
Replies
Last Post
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-27-2015 03:16 PM