MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   Classic Mustangs (Tech) (https://mustangforums.com/forum/classic-mustangs-tech-16/)
-   -   67 that's been siting for a while. (https://mustangforums.com/forum/classic-mustangs-tech/717019-67-thats-been-siting-for-a-while.html)

humpbackshooter Feb 10, 2015 09:59 PM

67 that's been siting for a while.
 
Hello all. Trying to get my reply count up so I can see the pics. Also need info on what I should do. I have a 67 coupe, 200/6. It's been siting for over 8 yrs. not cranked. Besides changing the oil, what other things need to be done. Got a new battery. Was thinking I need to blow out the gas lines after I clean out the gas tank. This going to be a project car.
Thanks,
Hump.

humpbackshooter Feb 10, 2015 10:01 PM

Pics to come.
 
As soon as I get some pics, I'll post them.

Thanks,
Hump.

humpbackshooter Feb 10, 2015 10:04 PM

Answers
 
I'll try to search the forums before I post.
Thanks,
Hump.

MonsterBilly Feb 10, 2015 11:19 PM

I wouldn't hurt to take the carb off and clean it thoroughly. Also, you may want to remove each spark plug, pour a little bit of mystery oil in each cylinder and turn I over by hand a few times.

barnett468 Feb 11, 2015 12:13 AM

.
rebuild the carb.

install new fuel pump.

use oil with zddp like valvoline VR-1.

check points gap . . it should be .027".

suck on hose going to distributor . . if you can suck air you need a new vacuum diaphragm
.

humpbackshooter Feb 11, 2015 07:38 AM

Follow up
 
MB.....check that.....I did do just that. Poured some Marvel oil in the each of the cylinder holes...let sit over nite and then got on the crank with a breakin bar and turned the engine over. Will most likely do that again before I turn it over with a battery. A carb rebuild is in the plans.

B468
Will have to ck that vacuum diaphragm.
Thanks for the info.

Hump

humpbackshooter Feb 13, 2015 12:46 PM

https://cimg4.ibsrv.net/gimg/mustang...aedc430c22.jpg

humpbackshooter Feb 13, 2015 12:47 PM

https://cimg3.ibsrv.net/gimg/mustang...e18b1ef561.jpg

humpbackshooter Feb 13, 2015 12:49 PM

https://cimg0.ibsrv.net/gimg/mustang...90ee3c0566.jpg


the kick panels was in the process of being replaced

humpbackshooter Feb 13, 2015 12:51 PM

https://cimg1.ibsrv.net/gimg/mustang...fb9517ce15.jpg


Original A/M radio in back floor borad.<br/>Both the front & back seats...A O.K.


All times are GMT -5. The time now is 09:39 AM.


© 2026 MH Sub I, LLC dba Internet Brands