1967 GT emblem template/measurements
Laying out the location of the G T on a 1967 FB. I have seen the template (attached) and I have acquired a few additional measurements, but looking a couple other references. If anyone can provide any of the following, it would be most helpful.
Passenger side: - from rear of front fender (by door) to the left hand side of the G - from rear of fender to middle of T - from fender wheel opening to middle of T - from upper belt line to top of T - from rocker panel trim to bottom of T Driver side: - from rear of front fender (by door) to the right hand side of the G - from rear of fender to middle of T - from fender wheel opening to middle of T I don't have the stripes on yet, but I am laying them out as I know that will help. Using these guides: - lower, thin stripe starts 1/8" up from the door - 1/2" gap all the way around the letters. Meaning the middle stripe is 1/2" back from the G and the T. Also 1/2" from the top and bottom thin stripes https://cimg3.ibsrv.net/gimg/mustang...f7279a68b3.jpg |
All times are GMT -5. The time now is 02:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands