Door lock knobs won't push down
06-24-2019, 09:54 PM
Thread Starter
Join Date: Jun 2009
Location: Maryland
Posts: 10
Door lock ***** won't push down
Hi folks - I have a recently purchased 65 pony car. I noticed that I am not able to push the door lock ***** down to lock the doors when exiting the car. The only way to drive the ***** down is by using a key when the door is closed. Does this sound right? If not, any insights on what the problem might be?
06-25-2019, 06:00 AM
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
After 50+ years everything the locking mechanism probably needs a good going over. Pull off the door panel and see what you have going on.
06-25-2019, 09:24 AM
Thread Starter
Join Date: Jun 2009
Location: Maryland
Posts: 10
Ok, so it sounds like I should normally be able to push down the **** manually. Yup, need dive deeper. BTW, I appreciate the warning in your posts.
06-27-2019, 07:38 AM
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
Oh yeah, they need to go up and down with only minimal resistance.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nassaubayman
Classic Mustangs (Tech)
0
07-03-2009 03:28 PM
bignickwaite
5.0L (1979-1995) Mustang
9
11-21-2007 08:26 AM
KOMan
5.0L (1979-1995) Mustang
8
11-06-2007 01:06 PM
Silent Rain
V6 (1994-2004) Mustangs
10
03-06-2007 04:54 AM
66ckurt
Classic Mustangs (Tech)
7
12-01-2005 10:33 PM