starlifter8084

I have a 1992 Ford 5.0 HO motor/wiring harness/computer from a 92 5.0 Thunderbird that was equipped with the AODE. I want to mate it to a t-5 and drop it in my 65 coupe. Wondering what problems I can expect on the FI part of it. What needs to be jumpered to use the Auto trans Computer with the 5.0. Can I use all the stock items and just clean up the extra wiring? Thanks Mike

rmodel65

im using a 5.0 auto conputer in my 91gt vert that i swapped the auto out of the main difference in the computer i used the rpms dont falls as fast as the manual computer! I dont know if the tbird computer as the mustang though. i running an A9P puter!

starlifter8084

I had been told ( by a questionable authority) that the engine would not run right due to the sensor input from the trans indicating speed, gear etc. I am new to this and have found very lmited info on it. This setup is similar to the 92 to 93 mustang setup which differs somewhat from the 89~91 setup. I hope I can make it work without alot of expense. If it's too costly I will just drop on a 4 bbl.