all new parts !
Hi all,
I order a _huge_ list of parts from the states, which all arrived this morning.
I had to go to work (should have pulled a sicky), so I haven't unpacked anything yet.
I got:
rear axle housing 9" for 65 model,
Ford racing 3.50:1 track loc diff (31 spline)
moser axles
disc brakes for the back
all new break lines
diskbrakeswap (swap.2) (disc brakes, spindles, dual master)
shocks for the back
monte carlo bar and export brace
new wheels (15"x7 cragar quick trick I). they look great, but are steel. Couldn't afford alloys
and last but no least: A rebuild T5 from a 89 mustang with shifter and adapter kit (crossbrace, adapter plate, etc)
and a bunch of small parts, like wheel bolts, u-bolts, u-joints ....
All in all 30cubic feet and 550 pounds :-)
I'm looking forward to tonight and the next few weekends. It'll be loadsa fun !
I'm quite sure I'll open a lot of threads in the near future: how do I? and where does this bolt go kinda questions
Kalli
I order a _huge_ list of parts from the states, which all arrived this morning.
I had to go to work (should have pulled a sicky), so I haven't unpacked anything yet.
I got:
rear axle housing 9" for 65 model,
Ford racing 3.50:1 track loc diff (31 spline)
moser axles
disc brakes for the back
all new break lines
diskbrakeswap (swap.2) (disc brakes, spindles, dual master)
shocks for the back
monte carlo bar and export brace
new wheels (15"x7 cragar quick trick I). they look great, but are steel. Couldn't afford alloys
and last but no least: A rebuild T5 from a 89 mustang with shifter and adapter kit (crossbrace, adapter plate, etc)
and a bunch of small parts, like wheel bolts, u-bolts, u-joints ....
All in all 30cubic feet and 550 pounds :-)
I'm looking forward to tonight and the next few weekends. It'll be loadsa fun !
I'm quite sure I'll open a lot of threads in the near future: how do I? and where does this bolt go kinda questions
Kalli
nice,
congrats on the parts i have never sized up my order in cubic feet lol[8D]
but normally i buy a little wait a while etc, im pretty much in the trim stage with mine now
congrats on the parts i have never sized up my order in cubic feet lol[8D]but normally i buy a little wait a while etc, im pretty much in the trim stage with mine now
same here. usually i get a cable here and a switch there.
But as I had to get the rear axle in and organise all the shipping I thought it might be cheaper in the long run to get all oversized parts in at the same time. Although this is a momentarily killer. huge money. Will have hours of fun putting all that in though :-]
But as I had to get the rear axle in and organise all the shipping I thought it might be cheaper in the long run to get all oversized parts in at the same time. Although this is a momentarily killer. huge money. Will have hours of fun putting all that in though :-]
all sorts :-)
ranging from
- envy (people p1ssed off because they bought a 100.000$ sports car and the girlfriend prefers mine)
- how much did that cost ? 500.000 Euro?
- thumbs up
- girls starting to sing "mustang sally" when you pass
what I was surprised most about is that I never get challenged at a traffic light. don't get me wrong, I don't want to race. But they either think that car is a dinosaur (slow as ****), or they think it's the ultimate race car (most would beat me hands down)
I guess Playstation and Xbox helped educating that one ;-)
love it, best fun ever.
Kalli
ranging from
- envy (people p1ssed off because they bought a 100.000$ sports car and the girlfriend prefers mine)
- how much did that cost ? 500.000 Euro?
- thumbs up
- girls starting to sing "mustang sally" when you pass
what I was surprised most about is that I never get challenged at a traffic light. don't get me wrong, I don't want to race. But they either think that car is a dinosaur (slow as ****), or they think it's the ultimate race car (most would beat me hands down)
I guess Playstation and Xbox helped educating that one ;-)
love it, best fun ever.
Kalli
those parts ordered from quick performance racing
9" housing for 65 model
3.5 track loc diff from ford racing
brake setup from ford racing
axles from moser
braided brake lines
not pictured are u-bolts etc
the wheel is from summit racing, cragar quick trick I + center caps
the shocks ordered from NPD: KYB gas-a-just
[IMG]local://upfiles/52145/900A072EAFC746118C6D86300B0E9DC1.jpg[/IMG]
9" housing for 65 model
3.5 track loc diff from ford racing
brake setup from ford racing
axles from moser
braided brake lines
not pictured are u-bolts etc
the wheel is from summit racing, cragar quick trick I + center caps
the shocks ordered from NPD: KYB gas-a-just
[IMG]local://upfiles/52145/900A072EAFC746118C6D86300B0E9DC1.jpg[/IMG]
and here's a lovely T-5 from street performance racing
with adapter plates etc.
shifter is behind the gearbox .... (photography is not one of my hobbies)
[IMG]local://upfiles/52145/1E4EC739CC0245288789209645A41996.jpg[/IMG]
with adapter plates etc.
shifter is behind the gearbox .... (photography is not one of my hobbies)
[IMG]local://upfiles/52145/1E4EC739CC0245288789209645A41996.jpg[/IMG]
My guess is your delivery man is seriously cussing you
Have fun putting all that in.
And I thought I ordered a lot of parts today when I ordered a headlight wire harness plus new parklights with related retainers, gaskets, lenses, etc. Got lucky and found time I wouldn't normally have to put the new dashpad in on Tuesday night so it was time for me to move onto the next step in my overall plan.

Have fun putting all that in.
And I thought I ordered a lot of parts today when I ordered a headlight wire harness plus new parklights with related retainers, gaskets, lenses, etc. Got lucky and found time I wouldn't normally have to put the new dashpad in on Tuesday night so it was time for me to move onto the next step in my overall plan.


