GT99GT

i heard somewhere that stock k members can't handle new offset steering rack bushings but i was planning on changing them to polyurethane.... what do you guys think.... i need to buy them asap because im going to install a bunch of stuff soon... get back to me
thanks

GT99GT

does anyone know????

callmecobra

ide just get a tubular man...you will drop some weight, and handle a little better!

Mustang88LXKid

well depends how much he wants to spend cause they can be very pricey. But the best kit I know of that can handle driving the streets is the Maximum Motorsports K-Member kit, it comes with everything you need for your front supsension. You can also buy it alone too, for like 600.

GT99GT

im only gonna change the offset steering rack bushing to polyurethane... can i do that with the stock set up... thats the question

Stratus183

You shouldnt have any problams if you use poly-urethane rack bushings.

vfast

you'll be ok with the bushings

GT99GT

good deal thanks everyone... one last question...

do you guys think that i SHOULD change them to polyurethane ... or just leave them stock

n2o44

absolutelly not , when you hit a corner hard, the initial shock will flex the rubber junk and once your car settles into the turn , i will come back you will compensate for it while turning you will feel it, get poly or a solid ones , mm offers them and many others , your toe in turns will change like i said when you initally load it , dont use the stock ones , unless your more into a comfortable ride lol, also mm has a write up on not useing offset rack bushings unless you know you are bump steer is excessive ,

hotrodman

say dude a got your answer ,,yes they will work ,,i have same set up ,,with off set bushings,, also have bump steer kit,,ft coil overs,,90/10 s in ft,, 50/50 in rear s/s/bars..air bag,,s/s/hd tourqe boxes,,frame connectors,, 8 pt roll bar ,,its the **** man im telling you ,,,oh 200lbs springs in ft,,