Overflow bottle adhesive
03-21-2006, 09:50 AM
#1
Thread Starter
Join Date: Mar 2006
Posts: 4
Overflow bottle adhesive
Hey Folks in Mustang land.....
I wish to modify my radiator overflow bottle by taking a two inch section out of the center, here is the problem. Do any of you fabricators out there know what kind of adhesive can be used to reattach the two halfs?
I wish to modify my radiator overflow bottle by taking a two inch section out of the center, here is the problem. Do any of you fabricators out there know what kind of adhesive can be used to reattach the two halfs?
03-21-2006, 03:23 PM
#2
Retired MF Moderator
Join Date: Apr 2004
Location: I live in Canada, eh
Posts: 7,156
RE: Overflow bottle adhesive
weird. Why would you want to take out 2 inches?!?!
Anyway, I have never tried it but I would think that any "plastic welding" adhesive would work, such as those used for pvc pipes.
Anyway, I have never tried it but I would think that any "plastic welding" adhesive would work, such as those used for pvc pipes.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
yourmom6990
3.7L V6 Technical Discussions
2
10-14-2015 10:08 PM
MustangJourney
V6 S197 General Discussion
1
09-02-2015 04:32 PM