MustangForums.com - super modification day,, some q's

Today was 13 hours of straight wrenching... I have a 94, 5.0 and Today I did alot of goodies! I started off with edelbrock elite series valve covers, edelbrock performer rpm 2 upper and lower intake, 1" trick flow spacer ( tall valve covers) edelbrock elbow, ford racing 30# FUEL INJECTORS. edelbrock 70 mm throttle body, granatelli mass air sensor, and a bbk cold air intake... ( the one that mounts in the fender). I also put in the msd pro distributer. and autolite racing spark plugs. I am seeming to have a problem with the way it mounts up the bottom tube is BIG then the mass air is big , the tube that goes between the mass air and the throttle body is smaller, the angle is not right and it looks like a pile of crap... i also ran into another problem, my spark plug wires are not long enough. so i had to rearrange them and it still looks like junk so i need to know where i can get msd 8.5mm wires without the solid core that are longer? also Thank god I have a cobra rr svo hood..... that would never clear a stock hood.... I will have some pictures soon guys.. i forgot my camera.. this week is focusing on them traction bars and upper control arms... anyone know anything elso I should look out for or anything about that intake or the wires? thanks for all your help... Bob