General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Weld Draglite with 28x10.5?

Old 03-30-2006, 01:08 PM
  #11  
Norway302
Thread Starter
 
Norway302's Avatar
 
Join Date: Mar 2006
Posts: 27
Default RE: Weld Draglite with 28x10.5?

Looks very good! Thanks for sharing the pic.
What size rims do you have in front, and what backspacing?
I was going to order 3.5" fronts, but it might be kinda small for roaduse.
Norway302 is offline  
Old 03-30-2006, 01:18 PM
  #12  
1fastzook
4th Gear Member
 
1fastzook's Avatar
 
Join Date: Feb 2006
Location: Md
Posts: 1,119
Default RE: Weld Draglite with 28x10.5?

i personally wouldnt run a 3 1/2 rim for daily use.15x7 4.5 bs.
1fastzook is offline  
Old 03-30-2006, 01:24 PM
  #13  
Norway302
Thread Starter
 
Norway302's Avatar
 
Join Date: Mar 2006
Posts: 27
Default RE: Weld Draglite with 28x10.5?

Ok, so this would be a great combo:
WLD-90-57038 Wheel, Draglite, Aluminum, Polished, 15 in. x 7 in., 4 x 4.25/4.5 in. Bolt Circle, 4.5 in. Backspace
WLD-90-58040 Wheel, Draglite, Aluminum, Polished, 15 in. x 8 in., 4 x 4.25/4.5 in. Bolt Circle, 5.5 in. Backspace

I`m going to order from Summit, and hope to have the rims here right after easter (i live in Norway).
Norway302 is offline  
Old 03-30-2006, 02:37 PM
  #14  
1fastzook
4th Gear Member
 
1fastzook's Avatar
 
Join Date: Feb 2006
Location: Md
Posts: 1,119
Default RE: Weld Draglite with 28x10.5?

thats the same ones i have
1fastzook is offline  
Old 04-05-2006, 11:46 AM
  #15  
Norway302
Thread Starter
 
Norway302's Avatar
 
Join Date: Mar 2006
Posts: 27
Default RE: Weld Draglite with 28x10.5?

I got my tires today...looks a bit narrow for the rears, but i think they willl look better when i get them on the rims.
The Welds are shipped from Jegs yesterday, and i think they will be here right after easter
Looking forward to see them on the car....doesnt look so good now:

Norway302 is offline  
Old 04-05-2006, 03:47 PM
  #16  
1fastzook
4th Gear Member
 
1fastzook's Avatar
 
Join Date: Feb 2006
Location: Md
Posts: 1,119
Default RE: Weld Draglite with 28x10.5?

They will look better on the rims.What size tire did you get in the front?You cant really run a wider tire without taking off the quad shocks.You might want to lower your car a little when you get the wheels on.
1fastzook is offline  
Old 04-05-2006, 03:55 PM
  #17  
Norway302
Thread Starter
 
Norway302's Avatar
 
Join Date: Mar 2006
Posts: 27
Default RE: Weld Draglite with 28x10.5?

Same as you in the front; 205/60
Norway302 is offline  
Old 04-05-2006, 05:22 PM
  #18  
1fastzook
4th Gear Member
 
1fastzook's Avatar
 
Join Date: Feb 2006
Location: Md
Posts: 1,119
Default RE: Weld Draglite with 28x10.5?

what size tires are on the car now?
1fastzook is offline  
Old 04-05-2006, 05:29 PM
  #19  
Norway302
Thread Starter
 
Norway302's Avatar
 
Join Date: Mar 2006
Posts: 27
Default RE: Weld Draglite with 28x10.5?

There are 205/50-16 all around....I dont think it looks very good.
Norway302 is offline  
Old 04-05-2006, 05:38 PM
  #20  
1fastzook
4th Gear Member
 
1fastzook's Avatar
 
Join Date: Feb 2006
Location: Md
Posts: 1,119
Default RE: Weld Draglite with 28x10.5?

wow thats a small tire for the rear.The 255 should be about 3-4 inches wider than you have now.
1fastzook is offline  

Thread Tools
Search this Thread
Quick Reply: Weld Draglite with 28x10.5?



All times are GMT -5. The time now is 11:36 PM.