MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   General Tech (https://mustangforums.com/forum/general-tech-6/)
-   -   CUTTING FACTORY SPRING'S. WILL IT WORK? (https://mustangforums.com/forum/general-tech/164020-cutting-factory-springs-will-it-work.html)

westtndad Aug 9, 2006 01:45 PM

CUTTING FACTORY SPRING'S. WILL IT WORK?
 
I am wanting to lower my 99 mustang about 2 inche's. I know I can buy spring's that are all ready to put on and lower my car, but I was woundering why cant I just cut my factory one's? I know I dont need to heat them up but if I cut my factory one's will it hurt the spring any and how will it ride with the factory spring's cut?

2k1gt Aug 9, 2006 02:02 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
Dont do it. You will mess up the spring rate if you cut stock springs. If you want to lower your car 2" for cheap buy some used frpp c-springs and cut them.

mustangman02232 Aug 9, 2006 02:55 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
you can, but i dont recomend it, do it right, its not a cheap honda

amrcnidyot Aug 9, 2006 06:22 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
ive heard it will ride like crap. and no matter what, if you lower it more than 1.5, youll need new cc plates too.

ExtremeSaleen Aug 9, 2006 10:46 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
I remember my brother cutting the coils on an S10s to lower them back before companies were making them. He would only cut just a little bit then heat up and flatten a coil out. The trucks had a rougher ride, but not too bad.

It can be done, but if you don't know what you're doing, you'll probably beat the hell out of you and the car because the ride would suck. Not worth it when lowering springs are so cheap.

dirtysanchez Aug 10, 2006 02:12 AM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
the springs are that size for a reason. when you cut them you take away the spring's integrity. dont do it. just buy some or you will regret it.

westtndad Aug 10, 2006 10:37 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
what are "frpp c-springs" and where can i get them?

Vash the Stampede Aug 10, 2006 11:06 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
i actually cut my springs. and wow what a mistake.... because my strut was hanging out of my hood after hitting a pot hole on the highway.

i really wouldn't recommend it.

sweet99 Aug 10, 2006 11:19 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
If you cut springs their rating will probably quadruple, meaning very stiff! Buy Eibachs from eBay. mark

AXLE Aug 10, 2006 11:58 PM

RE: CUTTING FACTORY SPRING'S. WILL IT WORK?
 
traction will suck too!


All times are GMT -5. The time now is 11:45 AM.


© 2026 MH Sub I, LLC dba Internet Brands