tuneskies

Can anyone help me fix my tach? It stays at 3000 until i go over 3000 rpm I know that its not idleing that high. What could it be?

Chopper

I had this problem with a Lincoln MK VIII and I removed the tach and sprayed graphite lock lubricant into the back of the tach.I might have just been lucky to not have screwed anything up but it worked fime after.Just don't hose everything down,use as little as you can.You can try shaking the tach using a rotating motion around it's center axis to see if the needle is freeing up.

hwy1strat

It sounds like the needle is just stuck and can't drop down

red2k1gt

Stock gauge cluster? I would take the gauge pod out and take a look inside to make sure nothings obstructing it.