KillSwitchNY

GUYS, i need help... i have front hawk's slotted rotors. now i need pads..

i want of course good stopping power and less brake dust and noise..

i was looking at steeda/hawk pads.... ebc greenstuff or redstuff.... im not sure what else to go with... please let me know whats out there that i should go with.... the car is a high power street car but everyday driving will be done. looking in the ballpark of $120 to spend... fronts only. thanks

7arpad7

I have Hawk slotted rotors and pads... No problems or complaints... I am not sure that you can do all that much better without upgrading the whole breaking system.

xzo6

If you do not like brakedust get Hawk ceramic pads.If you want something less expensive go with Hawk HP pads.There will be a bit of brakedust with the HP pads.Good value,however.

sandcracker21

what rotors are you running with the hawk pads?

KillSwitchNY

Hawk's slotted and vented rotors (5lug)

KillSwitchNY

where can i get the ceramic pads??? im looking on summit and i found the hawk HPS pads that are like $70 but the ceramic pads are showing up only for like the newer cars

live4motocross11

do you have to replace those rotors every pad change then, cuz u cant turn drilled and slotted rotors can u? i.e. on the brake lathe

live4motocross11

ne one

Colorado_Mustang

I would assume that slotted/drilled rotors can be machined...they had to be machined during the manufacture process.

KillSwitchNY

nah you have to be able to cut drilled rotors.... theres no big difference. but i only got the slotted ones anyway because im not about to have my rotors crack at the holes!!. although i do like the design of the drilled/ slotted rotors where the drills are separated enough to reduce cracking.