Gear Ratio's
hey, im trying to calculate the gears in my jeep, does anyone kno how to so this but just spinning the tire and watching the revolutions of the tire and on teh driveshaft?...i kno there is a way, i just dont kno how to do it. if anyone could help me out that would b great.
thanks. |
RE: Gear Ratio's
Easiest way. Spin tire one revolution, count how many times the driveshaft turns.
Examples....... 3 1/4 turns=3.27`s 3 1/2 turns= 3.55`s 3 3/4 turns= 3.73`s etc........ |
RE: Gear Ratio's
ORIGINAL: sprostang Easiest way. Spin tire one revolution, count how many times the driveshaft turns. Examples....... 3 1/4 turns=3.27`s 3 1/2 turns= 3.55`s 3 3/4 turns= 3.73`s etc........ |
RE: Gear Ratio's
Now that aint right. I bet it has 3.55`s. Can you read the tag on the diff cover?
|
RE: Gear Ratio's
ORIGINAL: Crsytal Ice ORIGINAL: sprostang Easiest way. Spin tire one revolution, count how many times the driveshaft turns. Examples....... 3 1/4 turns=3.27`s 3 1/2 turns= 3.55`s 3 3/4 turns= 3.73`s etc........ Each of you mark a tire |
RE: Gear Ratio's
good point bout the diff, and no i cant read the cover of the diff, plus the 31" tires play a part too
|
RE: Gear Ratio's
You might try turning the driveshaft with both rear tires off the ground. They should spin fairly equally unless you have a dragging brake or bad bearing.
|
All times are GMT -5. The time now is 08:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands