5.0 to 4.6 four valve swap
#3
RE: 5.0 to 4.6 four valve swap
I don't know about that.. wouldn't the Mach motor make more power than a '94 5.0?
Shinoda, check out this site for info if you are REALLY serious about the swap.. it isn't easy
http://modularfox.com/default.aspx
Shinoda, check out this site for info if you are REALLY serious about the swap.. it isn't easy
http://modularfox.com/default.aspx
#4
RE: 5.0 to 4.6 four valve swap
Stock for stock, yes. Dollar for dollar, not even close. 400hp from a 302 is cheaper than 350 from a 4.6L DOHC, and the 302 will produce significantly more low end power.
ORIGINAL: GreyStang
I don't know about that.. wouldn't the Mach motor make more power than a '94 5.0?
I don't know about that.. wouldn't the Mach motor make more power than a '94 5.0?
#5
RE: 5.0 to 4.6 four valve swap
Yes modding fox motors is cheaper, but if he already has the Mach motor then that's a real inscentive to go modular especially if he can do the conversion work himself. We may never know, the guy seems to be a 1-post wonder
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
4.6L (1996-2004 Modular) Mustang
3
10-09-2015 03:27 PM