MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   General Tech (https://mustangforums.com/forum/general-tech-6/)
-   -   pulsating noise coming from clutch pedal...? (https://mustangforums.com/forum/general-tech/247932-pulsating-noise-coming-from-clutch-pedal.html)

badkarma16 02-20-2007 03:42 AM

pulsating noise coming from clutch pedal...?
 
soo i have a 1999 v6 mustang, and i have noticed that my clutch pedal is pulsating. if you rest your foot on the pedal, it will actually almost bounce against your foot.but if i press it down just a little, the noise, and the pulsating dissappears. also, the rate of pulsating and the noise increases as RPM's increase. anyone have suggestions as to what the problem is? thanks for the help. erich.

corvetteguy 02-20-2007 08:49 AM

RE: pulsating noise coming from clutch pedal...?
 
If you consider that when you depress the clutch
the first thing that happens is the clutch fork presses
against the throwout bearing, then the bearing contacts the
fingers of the clutch pressure plate which is revolving.
Sounds like your pedal is adjusted to minus free play
and the bearing is always rubbing.

95 comvert 02-22-2007 04:04 AM

RE: pulsating noise coming from clutch pedal...?
 
Sounds like a bad to bearing..

Jfsram 02-24-2007 08:00 PM

RE: pulsating noise coming from clutch pedal...?
 

ORIGINAL: corvetteguy

Sounds like your pedal is adjusted to minus free play
and the bearing is always rubbing.

My bearing is constantly touching my fingers. I have the Mustang adjusted like that and my hydraulic clutch Ram is also like that. I know for a fact this is bad news on an old style set up like the 3 finger stuff Ford and Mopar used to use.

If I adjust the Mustang to keep the bearing off the pressure plate. I have to press the pedal 2/3's of the way down to disengage the clutch.

badkarma16 02-25-2007 05:02 AM

RE: pulsating noise coming from clutch pedal...?
 
well i had my clutch, pressure plate, flywheel, T.O. bearing, and tranny all replaced.. even the clutch pedal.Free of charge on the pedal. so i dont think it's the to bearing. unless maybe they didn't seat it right? idk. i wouldn't be surprised if they screwed up the install but total... it was only 1000$ at the dealer..for everything. labor included.

corvetteguy 02-25-2007 09:14 AM

RE: pulsating noise coming from clutch pedal...?
 
It is possible that ford may make their adjustment
so the bearing is constantly rubbing against the
clutch fingers. I am sure that the bearing is installed
correctly as it fits on the splines of the shaft.
It sounds more like the fingers are not aligned
100% causing the bearing to pulsate as the
motor is turning.

If you show the condition to the shop they would
probably have an explanation.
Good luck

badkarma16 02-26-2007 01:42 AM

RE: pulsating noise coming from clutch pedal...?
 
alright. ill take it back tot he shop sometime soon. along with them checking out the service engine soon light too. thanks!


All times are GMT -5. The time now is 05:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands