pulsating noise coming from clutch pedal...? - MustangForums.com


General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Reply
 
 
 
Thread Tools Search this Thread
Old 02-20-2007, 03:42 AM   #1  
badkarma16
2nd Gear Member
Thread Starter
 
Join Date: Sep 2006
Location:
Posts: 173
Default pulsating noise coming from clutch pedal...?

soo i have a 1999 v6 mustang, and i have noticed that my clutch pedal is pulsating. if you rest your foot on the pedal, it will actually almost bounce against your foot.but if i press it down just a little, the noise, and the pulsating dissappears. also, the rate of pulsating and the noise increases as RPM's increase. anyone have suggestions as to what the problem is? thanks for the help. erich.
badkarma16 is offline   Reply With Quote
Old 02-20-2007, 08:49 AM   #2  
corvetteguy
3rd Gear Member
 
Join Date: Nov 2005
Location:
Posts: 544
Default RE: pulsating noise coming from clutch pedal...?

If you consider that when you depress the clutch
the first thing that happens is the clutch fork presses
against the throwout bearing, then the bearing contacts the
fingers of the clutch pressure plate which is revolving.
Sounds like your pedal is adjusted to minus free play
and the bearing is always rubbing.
corvetteguy is offline   Reply With Quote
Old 02-22-2007, 04:04 AM   #3  
95 comvert
1st Gear Member
 
Join Date: Feb 2007
Location:
Posts: 116
Default RE: pulsating noise coming from clutch pedal...?

Sounds like a bad to bearing..
95 comvert is offline   Reply With Quote
Old 02-24-2007, 08:00 PM   #4  
Jfsram
4th Gear Member
 
Jfsram's Avatar
 
Join Date: Jan 2007
Location:
Posts: 1,999
Default RE: pulsating noise coming from clutch pedal...?

Quote:
ORIGINAL: corvetteguy

Sounds like your pedal is adjusted to minus free play
and the bearing is always rubbing.
My bearing is constantly touching my fingers. I have the Mustang adjusted like that and my hydraulic clutch Ram is also like that. I know for a fact this is bad news on an old style set up like the 3 finger stuff Ford and Mopar used to use.

If I adjust the Mustang to keep the bearing off the pressure plate. I have to press the pedal 2/3's of the way down to disengage the clutch.
Jfsram is offline   Reply With Quote
Old 02-25-2007, 05:02 AM   #5  
badkarma16
2nd Gear Member
Thread Starter
 
Join Date: Sep 2006
Location:
Posts: 173
Default RE: pulsating noise coming from clutch pedal...?

well i had my clutch, pressure plate, flywheel, T.O. bearing, and tranny all replaced.. even the clutch pedal.Free of charge on the pedal. so i dont think it's the to bearing. unless maybe they didn't seat it right? idk. i wouldn't be surprised if they screwed up the install but total... it was only 1000$ at the dealer..for everything. labor included.
badkarma16 is offline   Reply With Quote
Old 02-25-2007, 09:14 AM   #6  
corvetteguy
3rd Gear Member
 
Join Date: Nov 2005
Location:
Posts: 544
Default RE: pulsating noise coming from clutch pedal...?

It is possible that ford may make their adjustment
so the bearing is constantly rubbing against the
clutch fingers. I am sure that the bearing is installed
correctly as it fits on the splines of the shaft.
It sounds more like the fingers are not aligned
100% causing the bearing to pulsate as the
motor is turning.

If you show the condition to the shop they would
probably have an explanation.
Good luck
corvetteguy is offline   Reply With Quote
Old 02-26-2007, 01:42 AM   #7  
badkarma16
2nd Gear Member
Thread Starter
 
Join Date: Sep 2006
Location:
Posts: 173
Default RE: pulsating noise coming from clutch pedal...?

alright. ill take it back tot he shop sometime soon. along with them checking out the service engine soon light too. thanks!
badkarma16 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Wheel Question! (New member, hi folks) Tivo304 New Member Area 5 05-30-2018 04:58 PM
V6 Engine Ticking Nick Oliver V6 S197 General Discussion 4 04-27-2018 02:00 AM
Upgrading to handle slicks? Info needed Dragonus18 4.6L (1996-2004 Modular) Mustang 8 09-09-2015 01:21 AM
HELP.. Should I buy this fox? raleigh05GTO New Member Area 5 09-04-2015 07:09 AM
03 V6 Mustang Ticking Noise Emblazoned General Tech 0 09-03-2015 10:45 PM


Tags
1996, clutch, mustang, noises, peda, pedal, problem, pulsates, pulsating, pushing, vibrates

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 10:08 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.