Intake manifold bolts....
#3
RE: Intake manifold bolts....
tighten until they get loose and then backoff 1/2 turn...just kidding...
...a quick email to edebrock should clear up the question...make sure you mention the aluminum heads...
edelbrock@edelbrock.com
...a quick email to edebrock should clear up the question...make sure you mention the aluminum heads...
edelbrock@edelbrock.com
Thread
Thread Starter
Forum
Replies
Last Post
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM