General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Stock 0-60 and 1/4

Thread Tools
 
Search this Thread
 
Old 03-27-2008, 07:48 PM
  #1  
03PoneyGT
Thread Starter
 
03PoneyGT's Avatar
 
Join Date: Mar 2008
Location:
Posts: 24
Default Stock 0-60 and 1/4

I own an 03 gt 5sd and was trying to find the 0-60 and 1/4 time.And noticed some weird stuff.. I read on a few sites, the 99 does it in 5.5 and 14 seconds to 1/4. I think they ment for the cobra or mach 1 if it was around than. And the 04 gt was like 6.4 Is that so? I guess ill time myself iono

03PoneyGT is offline  
Old 03-27-2008, 07:54 PM
  #2  
bacon57
3rd Gear Member
 
bacon57's Avatar
 
Join Date: Jul 2007
Location: Lake of the Ozarks
Posts: 507
Default RE: Stock 0-60 and 1/4

I think the new edge GT's are a little faster than 6.4, 5.5 sounds about right. As far as quarter miles go they usually run low 14's but sometimes somebody gets one into the high 13's
bacon57 is offline  
Old 03-27-2008, 07:58 PM
  #3  
2007GTRocket
 
2007GTRocket's Avatar
 
Join Date: Mar 2008
Posts: 1
Default RE: Stock 0-60 and 1/4

I like this site http://www.albeedigital.com/supercou...0-60times.html
2007GTRocket is offline  
Old 03-27-2008, 08:11 PM
  #4  
03PoneyGT
Thread Starter
 
03PoneyGT's Avatar
 
Join Date: Mar 2008
Location:
Posts: 24
Default RE: Stock 0-60 and 1/4

ORIGINAL: 2007GTRocket

I like this site http://www.albeedigital.com/supercou...0-60times.html
Yeah, thats one of the sites I used.
03PoneyGT is offline  
Old 03-28-2008, 08:45 AM
  #5  
acascianelli
5th Gear Member
 
acascianelli's Avatar
 
Join Date: Jul 2006
Location: Sterling Heights, MI
Posts: 4,409
Default RE: Stock 0-60 and 1/4

ORIGINAL: bacon57

I think the new edge GT's are a little faster than 6.4, 5.5 sounds about right. As far as quarter miles go they usually run low 14's but sometimes somebody gets one into the high 13's
That sounds about right. I too have heard that in the hands of a good driver, a new edge is capable of running a high 13.

A manual Mach 1 will run maybe just under around 5 flat to 60 and the 1/4 in low 13s.
acascianelli is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gene K
S197 Handling Section
1
10-21-2015 11:37 PM
heslekrants
Street/Strip
11
09-23-2015 04:02 PM
MonsterBilly
Classic Mustangs (Tech)
4
09-20-2015 06:56 AM
96stang3.8
V6 (1994-2004) Mustangs
1
09-10-2015 06:42 AM
zachary1988
4.6L General Discussion
5
09-04-2015 03:04 PM



Quick Reply: Stock 0-60 and 1/4



All times are GMT -5. The time now is 06:32 AM.