PhantomUSA1

Hey guys I'm just looking for a little cam help here
I was sold a 93 Cobra 5.0 cam the guy I got it from is telling me it is the same as a B303 cam can any one hook me up with the #s from both cams ???
Thanks
Phantom

NoGo95GT

93 cobra cam is .479 lift with 1.72 rockers, 118 1/4 lobe separation and270/270 adv. duration. The stock 5.0 cam is .444 lift with 1.6 rockers and .477 with 1.72 rockers, 115 lobe separation and 276/266 adv. duration. The B-cam has 284° duration (224° at .050) and 0.480" lift. Hope this helps

PhantomUSA1

Here is what I have Sorry no mustang just a Mark 7 LSC
96 Explore GT 40 Eng with 1&5/8 short headers under drive pulls 1.7 roller rockers MAS Air con. 95 mustang fuel rail with Adj. reg. 65 MM T.B. 2.5 in Exh. no smog
I picked up a cam that is out of a 93 Cobra and was told it was the same as a B 303 cam but after instaling it I seen no chang (this is in the stock 90 mark 7 5.0) now that I have the GT Eng to build I want to know what is a good cam not looking to buy a new stall right now BUT I can if need be now most of this is still in the trunk or on the old eng I have not had much time or a good cam to put it all on the GT40 Eng. but it is were I'm trying to get to
So all in all What is a good cam to put with my parts LOL
Phantom[/align]

OnyxCobra

definitely are not the same cams, the Cobra cam with 1.7 rockers and the B cam with 1.6 rockers have about the same lift but that's where the similarities end.