MSD cap on dizzy, where's #1?
 

http://i7.photobucket.com/albums/y26...518101736a.jpg

Can someone point out where #1 is on this MSD cap (didn't want to remove wires and lose my firing order since that's what I'm checking). I believe the very top wire is going to my #1 currently, but I have no idea if that is correct. You can see the plug for the distributor at the bottom of the pic to give you an orientation of the distributor.

Why don't U follow the spark plug wire from #1 piston, which is the front one on the passenger side..

I wasn't sure #1 was right on the dizzy. It's good though, I had enough of the original firing order hooked up correctly to figure out that I had 2 and 4 swapped. Thanks for the help anyway. I was hoping the MSD cap only fit on one way and had a marking for the number 1 plug on it.