pi swap
#2
RE: pi swap
Before year 99 mustangs had what is called NPI heads. After they started using PI heads. A GT with NPI heads makes about 180 rwhp, a GT with PI heads makes about 220 rwhp. So swap in newer heads to get more power.
This swap is usually comes with porting, polishing, a valve job, improved valve train. Sometimes people install forget pistons and increase compression, in these cases a set of new cams is also used. With such mods 280 rwhp is possible with 2v 4.6L.
This swap is usually comes with porting, polishing, a valve job, improved valve train. Sometimes people install forget pistons and increase compression, in these cases a set of new cams is also used. With such mods 280 rwhp is possible with 2v 4.6L.
#3
#4
RE: pi swap
well eventually i wanted to do an engine rebuild....after researching a lil bit it looks like this is a main component to a rebuild.. so basiclaly i would just wait till i did that right?
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM