d4salvat

Hey guys,
I'm a new member here. My name is David, I'm 25 and just returned from a deployment overseas with the Marine Corps.

My car is a 2004 mustang gt 5speed. I sucked water into my cold air intake and bent two connecting rods, shattered two piston heads and bent my crank shaft all before I deployed. When I came back last week I found out my transmission was stolen from my buddies house where I was storing my parts! So yeah, now I am trying to find a used engine and transmission to get it running again. So here is a question for you...

I came across a 2010 4.6 for a good price, is it compatible with my 2004?

Locke_03

I think with the right motor mounts it will fit, but you need a new computer for the install to work.

Timspony

Welcome to MF! ....sorry to hear about the water!!...GL with the new engine, check in the Modular 4.6 section for more info!

95SHO

If you can get the wiring harness and PCM then it should work with little modification.

machracer11

Welcome and good luck with the motor, I would say go with a 4v motor for the replacement

dominant1

For $6999 you can get a new coyote 5.0 crate motor from ford racing see here:


http://www.fordracingparts.com/parts...KeyField=11829


Here's how it looks:


http://forums.themustangsource.com/f...6/#post6101225

LS1fivepointO

LSx swap! It's a lot more work, but worth it just to p!ss people off