MustangForums.com

General Tech Ask model specific questions in the appropriate category below. All other general questions within.

hub and bearing

Thread Tools
 
Search this Thread
 
Old 10-08-2005, 10:35 PM
  #1  
jbsr11
Thread Starter
 
jbsr11's Avatar
 
Join Date: Oct 2005
Posts: 6
Default hub and bearing
i have an auto v6 00 stang. Ford wants 550 to do the job. Is this an easy job i can do myself?
jbsr11 is offline  
Reply
Old 10-09-2005, 12:23 AM
  #2  
Chopper
5th Gear Member
 
Chopper's Avatar
 
Join Date: Feb 2004
Location:
Posts: 2,028
Default RE: hub and bearing
Which hub and which bearing.That sounds kinda steep ($550?) even for a rear axle.Thats ten hours of labor to R&R an axle?
Chopper is offline  
Reply
Old 10-09-2005, 05:09 PM
  #3  
jbsr11
Thread Starter
 
jbsr11's Avatar
 
Join Date: Oct 2005
Posts: 6
Default RE: hub and bearing
they said i need to replace the hub and bearings on both sides of the front. i looked up the parts and it looks like the hub and bearings are about 75 for one side meaning they are charging 400 for labor
jbsr11 is offline  
Reply
Old 10-09-2005, 05:24 PM
  #4  
MikeHawke
Retired MF Moderator
 
MikeHawke's Avatar
 
Join Date: Apr 2004
Location: I live in Canada, eh
Posts: 7,156
Default RE: hub and bearing
that's a little steep.

how many miles are on your car?
MikeHawke is offline  
Reply
Old 10-09-2005, 07:17 PM
  #5  
vfast
I ♥ Acer
 
vfast's Avatar
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default RE: hub and bearing
are you talking about a new caliper?
vfast is offline  
Reply
Old 10-09-2005, 08:50 PM
  #6  
FoxGT
5th Gear Member
 
FoxGT's Avatar
 
Join Date: Jul 2003
Location: United States
Posts: 3,451
Default RE: hub and bearing
I just got done doing it to my friends car. Not hard, but it was an earlier mustang. & here is the price I paid. (this was also only one side)

FoxGT is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wheel Question! (New member, hi folks)
Tivo304
New Member Area
7
08-28-2023 12:19 PM
Chirp during hard shifts?
6bangr
4.6L V8 Technical Discussions
5
02-15-2016 07:40 AM
What other parts should I be concerned about if my pinion bearing went bad?
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
Loss of power after changing throw out bearing
Offendant
V6 (1994-2004) Mustangs
6
09-23-2015 07:21 PM
1995 Mustang GT RAM HDX / TOB noise problem after install?
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM
Back to Subforum
General Tech
View Next Unread
fender well/non fender well




Advanced Search
Quick Reply: hub and bearing


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 04:02 AM.