Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
#3
RE: Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
My 2nd gear syncro is shot on my t-45 tranny in my 96 GT. I called Ford and they told me they no longer sell rebuilt t-45 transmissions. What should I do now? Can other trannys fit without having to do anything major in fitting it? Thanks
#5
RE: Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
ORIGINAL: PipsBlackStang
Anybody know the answer to my question? Im looking at all these different trannys and Im not sure what will fit or what will work.
Anybody know the answer to my question? Im looking at all these different trannys and Im not sure what will fit or what will work.
A TKO will fit with little or no problems. And there are several other transmissions out there that will work with some time and effort. Your best bet is to call someplace like D&D motorsports and tell em what car you have, what you plan to do with it (hp wise) etc and they should be able to steer ya in the right direction.
#7
RE: Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
If is all you got is a busted syncro, just take it and have it fixed, the best thing to do is pull the trans yourself and take it to a mechanic. Pullin it will save you some $$$. If you still want to do a swap, I do know you have to use a trans from a modular motor, in other words a t5 will not fit, can't use a tranny off a windsor motor(302, 351).
#9
RE: Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
my T45 in my mustang GT is making chattering noises sometimes in neutral and is hard to get it in all gears i had a new clutch put in it recently and ive heard the quadrents go bad in these things leave me a message if you have any ideas about this
#10
RE: Gen. TECH: Manual transmissions, T5, T45, 3650, T56 ETC.....
my T45 in my mustang GT is making chattering noises sometimes in neutral and is hard to get it in all gears i had a new clutch put in it recently and ive heard the quadrents go bad in these things leave me a message if you have any ideas about this