Brake Lights, horn, and turn signal cancel do not work
03-27-2018, 02:21 AM
#1
Thread Starter
Join Date: Mar 2018
Location: Ohio
Posts: 1
Brake Lights, horn, and turn signal cancel do not work
So my brake lights, horn, and turn signal cancel do not work. I replaced the brake light switch but still nothing. Bulbs are good and I’m confident the wiring is intact. I’m leaning towards a turn signal switch as that’s where all three of these meet up but I wanted to ask people smarter than me to make sure before I drop $100. Any ideas? It’s a 67 coupe 200 i6.
03-27-2018, 08:34 AM
#2
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
Sounds like you're on the right track but before you go dropping a C-note I'd chase sparks with a test light and get some ground truth on what you're dealing with.
Factory wiring schematics and a $3.00 test light are your friend.
Factory wiring schematics and a $3.00 test light are your friend.
Thread
Thread Starter
Forum
Replies
Last Post
alice123
General Tech
0
08-27-2008 02:32 AM
Kara
2005-2014 Mustangs
13
05-14-2008 09:40 AM