General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Modification Suggesti

Thread Tools
 
Search this Thread
 
Old 01-17-2004, 11:27 PM
  #1  
NK7967
Thread Starter
 
NK7967's Avatar
 
Join Date: Jan 2004
Location: Canada
Posts: 3
Default Modification Suggesti



Hello, I'm new here and looking for some advice. I bought my 92 GT from Cali last spring and I'm considering doing some mods to boost up the pony's. Now this is the third fox body stang I've ownedand it's by far in the best shape of the 3. I'd hate to do anything that could potentially harm the condition.I live in Canada and to find a 92 in this shapeis next to impossible due to our nasty winters(-25F). I'd like to do something minor that won't bag the car or drop the resale value too much. Any suggestions will be grately appretiated.</P>


Neil </P>


<IMG src=smileys/smiley25.gif border="0"></P>


</P>
NK7967 is offline  
Old 01-17-2004, 11:36 PM
  #2  
vfast
I ♥ Acer
 
vfast's Avatar
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default Modification Suggesti

take a few mins and look over the site there are others with the same ?
vfast is offline  
Old 01-17-2004, 11:41 PM
  #3  
NK7967
Thread Starter
 
NK7967's Avatar
 
Join Date: Jan 2004
Location: Canada
Posts: 3
Default Modification Suggesti

ok, I'll see what I can find, thanks
NK7967 is offline  
Old 01-18-2004, 05:58 AM
  #4  
USAMuscle
4th Gear Member
 
USAMuscle's Avatar
 
Join Date: Sep 2003
Location: United States
Posts: 1,404
Default Modification Suggesti

You could just do some minor bolt-on modifications that can easily be swapped back like a cold-air induction, K&amp;N air filter, lower gears (3.55 or 3.73), aftermarket exhaust with off-road H-pipe or X-pipe, aftermarket shifter (won't boost power but will make shifting much easier), synthetic fluids in the tranny and rear end, maybe an intake swap, something like a Trick Flow intake. Follow that up with a chip and you'll be feelin' the power!
USAMuscle is offline  
Old 01-18-2004, 12:39 PM
  #5  
BLKSTANG9879
4th Gear Member
 
BLKSTANG9879's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 1,128
Default Modification Suggesti

Do some bolts ons that you can take off. When you goto sell it. Do the Mass air, Pullies, x-pipe with a cat back system. And if you got the money, And you can't take these off as easy. Get a set of 4:10s.
BLKSTANG9879 is offline  
Old 01-18-2004, 07:47 PM
  #6  
NK7967
Thread Starter
 
NK7967's Avatar
 
Join Date: Jan 2004
Location: Canada
Posts: 3
Default Modification Suggesti



Thanks all for the replies, I allready have synthetics through-out the car, as well the K&amp;N. I'll prob go with some exhaust, and a chip. I would also like to put some different rims on but I'll have to convert to 5 lug, what kind of work is involved?</P>
NK7967 is offline  




All times are GMT -5. The time now is 07:28 AM.