Project Steeda Dyno Numbers
#1
Project Steeda Dyno Numbers
The car is a 07 GT 5sp manual
Mods list:Steeda CAI with highflow elbow
CMCV Plates
Steeda UDP
Bassanni Longtubes and Bassanni O/R X-pipe
Pypes axle backs
DynoJet numbers: 310 rwhp342 rwtq
I was there and since its dynojet curious to see how it stacked up against other 05+ GT on that dyno. They had about 30 saved in their system with the list of mods and none were really over 300 rwhp. I was hoping to get some more hp but seeing how it stacked up against all the others was good enough. They had another 06 there with ported and polished heads with camsthat only pulled 336 rwhp. So is it possible the a dynojet can be calibrated to be true numbers? Also my car was dyno'd in 4th gear.
Mods list:Steeda CAI with highflow elbow
CMCV Plates
Steeda UDP
Bassanni Longtubes and Bassanni O/R X-pipe
Pypes axle backs
DynoJet numbers: 310 rwhp342 rwtq
I was there and since its dynojet curious to see how it stacked up against other 05+ GT on that dyno. They had about 30 saved in their system with the list of mods and none were really over 300 rwhp. I was hoping to get some more hp but seeing how it stacked up against all the others was good enough. They had another 06 there with ported and polished heads with camsthat only pulled 336 rwhp. So is it possible the a dynojet can be calibrated to be true numbers? Also my car was dyno'd in 4th gear.
#2
RE: Project Steeda Dyno Numbers
Sorry one of my pulls showed 360 rwtq, but I do not want to post that and get beat up on haha. Please bring your insight and if my number look ok with the mods. Also I will have my sheets to post soon.
Thanks
Thanks
#3
RE: Project Steeda Dyno Numbers
IMO that seems high. There may be a reason why everyone else did not pull 300rwp and you did with the same mods. Dyno can be made to read whatever they want, so something could of been off with the dyno.
Either way nice numbers and nice car!
Either way nice numbers and nice car!
#4
RE: Project Steeda Dyno Numbers
Sorry the reason I posted what the others were pulling was to show that even some really modded cars were not pulling the big number people post on this site. Just trying to say that maybe all dynojets are not crazy high.
#5
RE: Project Steeda Dyno Numbers
Your right. Allot of people claim numbers that are correct. I think people put to much trust in there tuner that there numbers are 100% correct. Alot of tuners show higher numbers, for one reason. If Car A shows 10-30 more hp than what Car B shows at another tuner, where do you think Car C is going to spend his money? I never doubt anyone's numbers.
#6
RE: Project Steeda Dyno Numbers
Here's a few shots of my Steeda built by Dallas Mustang on the dyno. They did a retune yesterday after I had a Vortech s/c installed.
437.9 RWHP and 380 torque. I'm a happy guy!!
If you go to the Dallas Mustang website, scroll down to customer's rides, you will see some shots of my new paint job also....
http://www.dallasmustang.com
[IMG]local://upfiles/23971/0F4BC26AEE6E44DE96A27AF5B1CD1FF5.jpg[/IMG]
[IMG]local://upfiles/23971/6FF13F3B26C64718B98B6CF3DE8B8A39.jpg[/IMG]
437.9 RWHP and 380 torque. I'm a happy guy!!
If you go to the Dallas Mustang website, scroll down to customer's rides, you will see some shots of my new paint job also....
http://www.dallasmustang.com
[IMG]local://upfiles/23971/0F4BC26AEE6E44DE96A27AF5B1CD1FF5.jpg[/IMG]
[IMG]local://upfiles/23971/6FF13F3B26C64718B98B6CF3DE8B8A39.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM