cfr865

Last Sat. a piece of my s/c piping came loose, the car quit running had to be towed home. I put the piping back together, but the car still would not start. I checked the plugs, they were black with soot and gas. I changed them the car would now start as long as the fuse was out of the Kenne Bell boost pump. However the car would not idle, it would only run as long as the rpm's were kept at or above 2k. I again pulled the plugs and they were again black with soot and fouled out, the car would not start until I cleaned them. Any ideas what sensor this could be,( burnt out maf ?) The car ran great until the piping came loose. I did un-hook the bat. and re-loaded the tune, did not help..

BillyBobJoe

first, buy some TB cleaner and do some intake cleaning. Then buy fuel system cleaners and carbon removers or whatever they're called. See if a good ol' cleaning helps.