Pypes Mid-Muffler System vs FRPP GTA's
09-10-2007, 01:39 AM
#11
1st Gear Member
Join Date: Mar 2007
Location: michigan
Posts: 93
RE: Pypes Mid-Muffler System vs FRPP GTA's
i will get the camera out tomarrow and get you some footage. might not sound all that great with the camera, but believe me its an awesome setup. Air the smell will go away within a week. took a few days for mine to leave.
09-10-2007, 09:47 AM
#12
3rd Gear Member
Join Date: Feb 2007
Location:
Posts: 697
RE: Pypes Mid-Muffler System vs FRPP GTA's
I need to hear these too. Although Id prefer to hear it in person, I will settle for a sound clip 
I am SoOSosOOOSosOOOOOOOOOoOOO close to taking off the SLP's and putting this Mid Muffler system on along with an O/R Pipe.
I am SoOSosOOOSosOOOOOOOOOoOOO close to taking off the SLP's and putting this Mid Muffler system on along with an O/R Pipe.
09-10-2007, 10:24 AM
#13
4th Gear Member
Join Date: Jan 2007
Location: Palm Beach to South Carolina
Posts: 1,567
RE: Pypes Mid-Muffler System vs FRPP GTA's
ORIGINAL: aircare84
Clearance between the gas tanks & driveshafts is TIGHT.I've got maybe 1/4" to the tanks. Also, look & plan the clamp orientation.Tip alignment is gonna be tricky, there's more pieces vs. the stock setup. I still have to go back tomorrow & realign the pass. side tip.
Clearance between the gas tanks & driveshafts is TIGHT.I've got maybe 1/4" to the tanks. Also, look & plan the clamp orientation.Tip alignment is gonna be tricky, there's more pieces vs. the stock setup. I still have to go back tomorrow & realign the pass. side tip.
09-10-2007, 06:01 PM
#14
3rd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Central OH
Posts: 871
RE: Pypes Mid-Muffler System vs FRPP GTA's
It should not be an issue as the stock D/S is approx 2 & 1/2 - 3" in dia there and the rear flange is 4-5" in dia there also. I've got at least 2" clearance with the D/S, it's the gas tanks that have the issue. You'ld also have to orientate the clamps there to clear. Can't see where you'ld have any problem.
I've got a co-worker bringing in a video camera for me to borrow tomorrow, so I'll get some footage up tomorrow night.
I've got a co-worker bringing in a video camera for me to borrow tomorrow, so I'll get some footage up tomorrow night.
09-10-2007, 06:06 PM
#15
3rd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Central OH
Posts: 871
RE: Pypes Mid-Muffler System vs FRPP GTA's
Here's a pic showing the clearance with the D/S.
The D/S is above the mufflers, so even though it looks close @ fwd end of mufflers, it has room.
[IMG]local://upfiles/47772/6D76EA34319D4111B80D7427398C89E4.jpg[/IMG]
The D/S is above the mufflers, so even though it looks close @ fwd end of mufflers, it has room.
[IMG]local://upfiles/47772/6D76EA34319D4111B80D7427398C89E4.jpg[/IMG]
09-11-2007, 06:04 PM
#16
3rd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Central OH
Posts: 871
RE: Pypes Mid-Muffler System vs FRPP GTA's
Sorry, but I'm not gonna be able to upload any clips. I borrowed a video camera @ work, but my computer M/B has no Firewire connection, the video camera has no USB connector, only Firewire.
I tried![sm=sorry.gif]
I tried![sm=sorry.gif]
Someone PLEASEEEEEE!!!!!! I need some clips and opinions!
09-11-2007, 06:14 PM
#19
3rd Gear Member
Join Date: Feb 2007
Location:
Posts: 697
RE: Pypes Mid-Muffler System vs FRPP GTA's
I've seen it already.... I'd like to see some other clips.... sometimes you never know what they have done to those cars. (I have ordered from Brenspeed before and I think they have a great thing going over there, so dont hate me for saying that Brenspeed loyalists).
09-17-2007, 06:33 PM
#20
3rd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Central OH
Posts: 871
RE: Pypes Mid-Muffler System vs FRPP GTA's
Finally got some sound clips posted, they are short.I don't have the time to spend on editing video.
Stock exhaust & stock H-pipes with Pypes Mid-muffler system;
Sound clip/video on next page.
Stock exhaust & stock H-pipes with Pypes Mid-muffler system;
Sound clip/video on next page.
