RE: FI Guys...Pics of your Gauge Pods....
 

My car is at work so ill take a pic for you tomorow

RE: FI Guys...Pics of your Gauge Pods....
 

gauges

[IMG]local://upfiles/54455/7DE08FC6EA474EA4B3716C6A8AEFDBBC.jpg[/IMG]

[IMG]local://upfiles/54455/60F93778488F4343A255612FDB58937C.jpg[/IMG]

RE: FI Guys...Pics of your Gauge Pods....
 

SOS and CDC with all Cobalt gauges.

[IMG]local://upfiles/60110/1865546D28CD49449032492D9064CEE9.jpg[/IMG]

[IMG]local://upfiles/60110/7172DF3D05CD489EB1E8D03CD6181415.jpg[/IMG]

RE: FI Guys...Pics of your Gauge Pods....
 

http://i149.photobucket.com/albums/s...e/gaugessm.jpg

RE: FI Guys...Pics of your Gauge Pods....
 

Here is mine but I'm going to remove it and install 2 smaller gauges in the middle of the dash.

http://farm3.static.flickr.com/2076/...3723d104_o.gif

RE: FI Guys...Pics of your Gauge Pods....
 

IMO the Shelby gauge pod looks like it belongs in the car.

Dustin

RE: FI Guys...Pics of your Gauge Pods....
 

I had to make a plate to fit between the chrome bezel and plasticvent tube. Taking the vent apart is the hard part. You have to pry up on a few plastic clips. I also had to sand down the lip of the plastic tube to give me enough room for the plate to fit in there, not to mention sand down the outside edge of my plexiglass plate because it was too thick. You'll probably have to drive or cut a hole in the plastic tube if you are using a mechanical boost boost gauge, otherwise the air tube would bend and get pinched when you put the vent back together. My electrical boost gauge didn't require any holes because the wires will pass between the two tubes. My plexiglass plate is barely visible and after sanding looks like frosted glass so i didn't even need to paint it.

I do miss that air vent, I think I will move it to the one on the other side. I don't use my AC often, but when I do I like that vent blowing right on me.

RE: FI Guys...Pics of your Gauge Pods....
 

Saleen FTW!!!!:D

[IMG]local://upfiles/67698/169CEA631C6B46D1844AE0B5A859F68E.jpg[/IMG]

RE: FI Guys...Pics of your Gauge Pods....
 

Great stuff guys, keep em coming. I appreciate it. I was hoping to get pics of CDC, Shelby, and Saleen dash pods...Thanks....

Pillar pod users, do you notice any interference with your side vision / line of site?? Same for dash pod users, any visibility issues?? Annoyances??

Moose, your gauges rock......

What do you all consider "must have" gauges for FI applications??

Thx,
Mike

RE: FI Guys...Pics of your Gauge Pods....
 

I really like those AC gauges. If I did something like that, I think I would put them in the center two gauges and leave the outer ones for creature comfort functions.