MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   GT S197 General Discussion (https://mustangforums.com/forum/gt-s197-general-discussion-49/)
-   -   nitrous help!!! possible?? (https://mustangforums.com/forum/gt-s197-general-discussion/371080-nitrous-help-possible.html)

4.6HighPerformance 11-16-2007 02:12 AM

nitrous help!!! possible??
 
hey, im looking to get a direct port nitrous system for my 06 gt.. is it possible to hide it to a point where u pop the hood and cannot see anyhting??? i want it so that no one will know, if so, how would i do it?? put the direct port foggers on the insude under the intake manifold... and would i be able to hide this kit??? please help.....


http://www.americanmuscle.com/nx-v8-efi-dps-8605.html

thanks, tony

4.6HighPerformance 11-16-2007 08:44 AM

RE: nitrous help!!! possible??
 
anyone??

Simon1 11-16-2007 09:28 AM

RE: nitrous help!!! possible??
 
Most of us haven't done direct port injection due to it not being neccesary and alot of work. Direct port isbest used by guys running ALOT of N2O. Only thing I could think of is getting theplatedesign from NOS or Eddlebrock, running the lines under the manifold and covering the plate at the throttle body with something.

4.6HighPerformance 11-16-2007 10:29 AM

RE: nitrous help!!! possible??
 
my problem is that my dad already found the first nitrous kit that i had installed on my gt.. so i sold that kit,, it was the NOS kit... now im looking to get something that is almost impossible to spot.... i want it so that you would have to take off the manifold to see it... and you can clearly see the lines on the plate system...

4.6HighPerformance 11-16-2007 10:35 AM

RE: nitrous help!!! possible??
 
wait, u talking about the tb plate system or the plate system that goes under the intake manifold... i really dont care how the nitrous is injected into the engine, i just need it to be invisible....

thanks for the help..

blownperformance 11-16-2007 04:25 PM

RE: nitrous help!!! possible??
 
go with a kit that offers the throttle body plate and then use an intake cover to help hide it. direct port would be alot harder to hide because its more lines and nozzels, you need one for each cylinder

Supercruzin 11-16-2007 10:12 PM

RE: nitrous help!!! possible??
 
How or where are you going to hide the bottle? I don't see how you can make the whole kitfully invisible from him with all of the other items that you need.

blackout 11-16-2007 10:22 PM

RE: nitrous help!!! possible??
 
My kit was completely hidden when it was my car (ZEX Wet Kit).. I put wire loom around all steel braided wires... I painted the fuel tap from the fuel rail to get fuel... I hid the NMU (Nitrous Management Unit, Solenoids already hidden) which was covered in black tape right in front of the intake close to the headlight. The nozzle was below my intake and could not be seen. The kit is cover your lines with wire loom and make everything else black... Simple...

-Jeff

ShadyNinja 11-16-2007 11:36 PM

RE: nitrous help!!! possible??
 
you can mount the bottle where the spare tire goes

4.6HighPerformance 11-17-2007 12:01 AM

RE: nitrous help!!! possible??
 
i can put 2 5lb bottles under the rear bumper...


All times are GMT -5. The time now is 02:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands