rdiaz89

Hello everyone i am currently in the process of installing an o/r mac prochamber! and i was wondering since i have an automatic does it require extended o2 sensors! or anything in particular or does the o/r pipe bolt right up to the stock o2 sensors please help

PiggySmallz

everything fits perfectly the only pain is getting the front passenger side o2 sensor. i removed my battery and tray and it was still tough to get to. but everything bolts in perfectly and fits

Larmo

Post some clips once you install her up!!!

rdiaz89

but my question is will i need extended o2 sensors? and what tools would i need to install this? and i will definetly post clips i cant wait

acstone7

Your going to need something with an extension and then a swivel piece,and some various deep sockets.

rdiaz89

thanks for the help acstone7

what about needing extended o2 sensors since it is an automatic?

rdiaz89

bump

PiggySmallz

you will not need o2 extensions

nitetimebolher

Not sure if the auto is different, but on the manual, the 3 02 sensors dont need to be extended.
I'm glad u went with the pro chamber, I'm putting high flows on mine.

Def post some vid clips, never heared that with flowmaster before.

PiggySmallz

nope there is no need to extend any of the sensors on the auto. I believe the only difference from the auto and manual is that on the auto, the rear sensors are right next to each other, according to TacoBill's how to on the off road h pipe. I haven't been under a manual to see the placement of the rear 02's