kleistang

Just want to ask what would be the price to port and polish my heads and maybe a valve job. i plan to call a couple of machine shops and see what they say about it but i want to know what u guys has seen. thanks guys

xyster

I'd say that it'd be around $600-800 for your GT... not sure about a valve job.

If I had to guess... maybe another $300 dollars but i'm not even sure about that. I can't remember. Reason I know is because I used to work inside of a performance shop where they did alot of this. I wasn't a mechanic lmao. I did graphic installations for vehicles and wraps for cars so I don't know too much technical price range data...

Gluck!

ADudeInNewJersey

Im curious to know the answer to this question too


-John

hotairgypsy

if one was too have this done what kind of gains do they expect to see

RED121572

Dont forgetto add thecost of a retune, too.

iwannagofast

Ive talked to a coulde of good machine shops and its between 1400-1600 for a bowl port and blend with a valve job.

ADudeInNewJersey

This may be the stupidest question to ask but.... What a valve job and what does it do?


-John

blueherd02gt

This is closer to what I payed but my buddy owned the shop. Don't forget the 3V Roller follower and Lifter Kit too..

kleistang

there is guy close by chargin me 1200 for the port and poslish job and the valve job. doing the 3 angle something and making sure all the ports has the same CCs he said. thats the first one i talk to and he just did my friends 302 heads, they look really nice