NA power?
#1
NA power?
just curious of how much power you all are putting down and which bolt ons you all are using to
get the most out of your N/A GTs.
track times and tranny options would also be nice.
pretty sure I will go FI in the future but want to go the NA route before doing so as well as
run some decent times in the process (low 12s or possibly a flat 12)
get the most out of your N/A GTs.
track times and tranny options would also be nice.
pretty sure I will go FI in the future but want to go the NA route before doing so as well as
run some decent times in the process (low 12s or possibly a flat 12)
#4
RE: NA power?
ORIGINAL: Thief_of_Hearts
250-255 whp?? I'd be happy with 320-330whp bolt ons w/4:10s tune /trq converter running mid 12s on stock tires.
250-255 whp?? I'd be happy with 320-330whp bolt ons w/4:10s tune /trq converter running mid 12s on stock tires.
My plan now is mid-low 12s NA with bolt-ons
#5
RE: NA power?
3.55 Gears, Steeda Tri-Ax, Steeda Chromoly LCAs, 17" Aluminum wheels & 235 stock Pirelli tires 25psi rear - 40psi front, C&L Street CAI, 93 Octane Brenspeed tune, Steeda UDP, Full weight, Approx 1/4-1/2 tank of gas, Shifting 6500 RPMs = 13.0 & 107.75 mph.
Temps estimated in the 60s, can't remember. This is at Englishtown, New Jersey. Car has had about 100 passes, 23000 est miles.
LT Headers with highflow cats, 1pc Driveshaft, Drag Radials, UCA, Panhard Bar + Brace, and I think 12.0-12.5 is definately in its future.
Temps estimated in the 60s, can't remember. This is at Englishtown, New Jersey. Car has had about 100 passes, 23000 est miles.
LT Headers with highflow cats, 1pc Driveshaft, Drag Radials, UCA, Panhard Bar + Brace, and I think 12.0-12.5 is definately in its future.
#6
RE: NA power?
Full bolt-ons NA is not worth the money u'll spend, been there done that, trust me.
Thief_of_Heartsu'll need DragRadials as Baha said, I have a PI@3,500 stall multidisc TC and 3.73's, with full bolt ons normal tires are useless from a dig and most of the times also when flooring the pedal from a roll. Got Nitto 555R 305/45 and traction problems were solved.
Now i'm just saving $$$ for a good SC'ed car.
Thief_of_Heartsu'll need DragRadials as Baha said, I have a PI@3,500 stall multidisc TC and 3.73's, with full bolt ons normal tires are useless from a dig and most of the times also when flooring the pedal from a roll. Got Nitto 555R 305/45 and traction problems were solved.
Now i'm just saving $$$ for a good SC'ed car.
#7
RE: NA power?
I have:
C&L CAI
91 Brenspeed canned tune
Saleen UDPs
Pypes o/r H
and put down 300+rwhp with 3:73s and 20" wheels...these cars are strong. Havent been to the track yet, but I plan on it very shortly
C&L CAI
91 Brenspeed canned tune
Saleen UDPs
Pypes o/r H
and put down 300+rwhp with 3:73s and 20" wheels...these cars are strong. Havent been to the track yet, but I plan on it very shortly
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM